Panasonic KX-TD208E User Manual
Programming the System Data in KX-TD208
Assigns the communication parameters of the RS-232C connection.
<Operation>
(1) Before assigning parameters, connect the KX-TD208 to COM 1 or
2 of the PC using an RS-232C cable.
2 of the PC using an RS-232C cable.
(2) If you want to change parameters, use the TAB key, the cursor keys or
the ENTER key to move the cursor.
The default settings of the KX-TD208 are as follows:
the ENTER key to move the cursor.
The default settings of the KX-TD208 are as follows:
Baud Rate = 9600
NL Code = CR+LF
Parity = None
Word Length = 8 bits
Stop Bit = 1 bit
Password = 1234
NL Code = CR+LF
Parity = None
Word Length = 8 bits
Stop Bit = 1 bit
Password = 1234
(3) After editing the data, enter the password and press the ENTER key.
(4) Loading starts and a message "Now loading system data" appears
when the PC terminal is connected to the KX-TD208.
Connection Status turns into "On-line(RS-232C)".
When loading is completed, "Main Menu" appears.
when the PC terminal is connected to the KX-TD208.
Connection Status turns into "On-line(RS-232C)".
When loading is completed, "Main Menu" appears.
<Condition>
(1) If the password is wrong, an error message appears after pressing
the ENTER key.
Re-enter the correct one and press the ENTER key again.
the ENTER key.
Re-enter the correct one and press the ENTER key again.
(2) An error message appears when something is wrong with the line.
Check the line and then press the ENTER key again.
Port No. 1 through 2
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600
NL Code CR+LF or CR
Word Length 7 or 8 bits
Parity None, Mark, Space, Even, Odd
Stop Bit 1 bit or 2 bits
Password 0 through 9 4, 5, 6 or 7 digits
Check the line and then press the ENTER key again.
Port No. 1 through 2
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600
NL Code CR+LF or CR
Word Length 7 or 8 bits
Parity None, Mark, Space, Even, Odd
Stop Bit 1 bit or 2 bits
Password 0 through 9 4, 5, 6 or 7 digits