Panasonic kx-tg1311bx User Manual

18

Outside calls can be transferred between 2 handsets. 2 handsets can have 
a conference call with an outside party.
Example: When handset 1 transfers a call to handset 2

Handset 1:
During an outside call, press {INT}. i Press {2} (desired handset 
number).
L

The outside call is put on hold.

L

If there is no answer, press {INT} to return to the outside call.

Handset 2:
Press {C} to answer the page.
L

Handset 2 can talk with handset 1.

Handset 1:
To complete the call transfer, press {ih}.
To establish a conference call, press {3}.

During an outside call, press {INT}. i Enter the desired handset 
number.
L k

 flashes to indicate the outside call is on hold.

{ih}

L

The outside call rings at the other handset.

Note:
L

If the other handset user does not answer the call within 30 seconds, the 
call rings at your handset again.

 Useful Information

If you still have difficulties after following the instructions in this section, 
disconnect the base unit’s AC adaptor and turn off the handset, then 
reconnect the base unit’s AC adaptor and turn on the handset.

Available for:
KX-TG1312/KX-TG1313

w

 is flashing.

L

The handset is too far from the base 
unit. Move closer.

L

The base unit’s AC adaptor is not 
connected. Check the connections 
(page 4).

L

You are using the handset or base unit 
in an area with high electrical 
interference. Re-position the base unit 
and use the handset away from 
sources of interference.

L

The handset registration is cancelled. 
Register the handset to the base unit 
(page 20).

TG1311_1312_1313BX(e).book  Page 18  Tuesday, September 2, 2008  10:36 AM