Panasonic KX-TG2480 User Manual

For assistance, please visit http://www.panasonic.com/consumersupport

39

The flash time depends on your telephone 
exchange or host PBX. Each line has its 
own setting.
You can select: “90ms” (milliseconds), 
“100ms”, “110ms”, “250ms”, “300ms”, 
“400ms”, “600ms”, or “700ms” (default).

Press {MENU}.

Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{

Select}.

Scroll to “Set tel line” by pressing 
{V}

 or {^}, then press {Select}.

Scroll to “Set flash time” by 
pressing {V} or {^}, then press 
{

Select}.

Press {V} or {^} to select the desired 
line.

Press {V} or {^} repeatedly to select 
the desired setting.

Press {Save}, then press {OFF}.

L

The setting should stay at 700 ms unless 
pressing {FLASH} fails to pick up the 
Call Waiting call.

L

If the unit is connected via a PBX, certain 
PBX functions (call transferring, etc.) 
may not work correctly. Consult your 
PBX supplier for the correct setting.

The line mode for both lines is preset to “B” 
and generally should not be adjusted. If 
k

 and l on the handset are not 

displayed properly when another phone 
connected to the same line is in use, the 
line mode selection is incorrect. Set line 
mode to “A”.

Press {MENU}.

Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{

Select}.

Scroll to “Set tel line” by pressing 
{V}

 or {^}, then press {Select}.

Scroll to “Set line mode” by pressing 
{V}

 or {^}, then press {Select}.

Press {V} or {^} to select the desired 
line.

Press {V} or {^} repeatedly to select 
the desired setting.

Press {Save}, then press {OFF}.

TG2480(e).book  Page 39  Monday, August 7, 2006  10:32 AM