Panasonic kx-tga542w User Manual
Programmable Settings
For assistance, please call 1-800-211-PANA (7262).
41
Note:
L
The setting should stay at 700 ms unless
pressing {Flash} fails to pick up the Call
Waiting call.
pressing {Flash} fails to pick up the Call
Waiting call.
L
If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
The line mode is preset to “B” and
generally should not be adjusted. If “Line
in use
generally should not be adjusted. If “Line
in use
” on the handset is not displayed
properly, the line mode selection is
incorrect. Set line mode to “A”.
incorrect. Set line mode to “A”.
1
Press {MENU}.
2
Scroll to “Initial setting” by
pressing {V} or {^}, then press {
pressing {V} or {^}, then press {
>}.
3
Scroll to “Set tel line” by pressing
{V}
{V}
or {^}, then press {
>}.
4
Scroll to “Set line mode” by pressing
{V}
{V}
or {^}, then press {
>}.
5
Press {V} or {^} repeatedly to select
the desired setting.
the desired setting.
6
Press {Save}, then press {OFF}.
Other options
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1
Press {MENU}.
2
Scroll to “Initial setting” by
pressing {V} or {^}, then press {
pressing {V} or {^}, then press {
>}.
3
Scroll to “Key tone” by pressing {V} or
{^}
{^}
, then press {
>}.
4
Press {V} or {^} repeatedly to select
“On” or “Off”.
“On” or “Off”.
5
Press {Save}, then press {OFF}.
Re-registering the handset
If “No link to base. Move closer
to base, try again.
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
unit, you may need to re-register the
handset to the base unit.
Important:
L
Make sure the base unit is not being
used.
used.
L
Have the handset and base unit near
each other when re-registering the
handset.
each other when re-registering the
handset.
L
KX-TG5432 and KX-TG5433 only:
Confirm the extension number of the
handset which has lost its link to the
base unit by placing the handset on the
base unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
Confirm the extension number of the
handset which has lost its link to the
base unit by placing the handset on the
base unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
TG5431_5432_5433(e).book Page 41 Friday, January 14, 2005 4:11 PM