Panasonic kx-ts620exb User Manual
19
Preparing the Answering System
Number of Rings
You can select the number of times the
unit rings before the answering system
answers a call, from “2” to “7” or “Toll
saver*”. Your phone default setting is
“4”.
unit rings before the answering system
answers a call, from “2” to “7” or “Toll
saver*”. Your phone default setting is
“4”.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the Speakerphone/headset {s/W}
indicator light is off.
cradle, the AC adaptor is connected
and the Speakerphone/headset {s/W}
indicator light is off.
1
Press .
2
Scroll to “TAD program ?” by
pressing {
pressing {
4
}
or {
3
}
, then press
{
OK} (Yes key).
3
Scroll to “Number of rings?”
by pressing {
by pressing {
4
}
or {
3
}
.
4
Press {OK} (Yes key).
• The current setting is displayed.
5
Select the number of rings by
pressing {
pressing {
4
}
or {
3
}
.
• You can also select the number of
rings by pressing dialling buttons
{
{
2} to {7} or {0} (Toll saver*).
6
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 3. To
• The display will return to step 3. To
exit the programming mode, press
or wait for 60 seconds.
• You can exit the programming mode any
time by pressing
.
{
?
}
Number of rings
:4
[OK]=Save
* Toll Saver
When you call the unit from a touch
tone telephone:
If the unit answers on the 2nd ring,
there is at least one new message.
If the unit answers on the 5th ring,
there are no new messages.
Hang up when you hear the 4th
ring. This will save you the toll charge
for the call.
When you call the unit from a touch
tone telephone:
If the unit answers on the 2nd ring,
there is at least one new message.
If the unit answers on the 5th ring,
there are no new messages.
Hang up when you hear the 4th
ring. This will save you the toll charge
for the call.
{ ? }
{ ? }
TS620EX.book Page 19 Monday, July 17, 2006 5:18 PM