Panasonic KX-MB2000 User Manual

The printer of this unit utilizes a laser. Use
of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.

CLASS 1 LED PRODUCT

Do not view directly with optical
instruments.

LED light of CIS properties
LED radiation output : Max. 1 mW
Wavelength :

Red 630 nm typ.
Green 520 nm typ.
Blue 465 nm typ.

Emission duration : Continuous

During or immediately after printing, the
fuser unit (A) gets hot. This is normal. Do
not touch the fuser unit.

Note:
R The area near the output tray (B) may also get warm.

This is normal.

B

A

Toner cartridge and drum cartridge
R When replacing the toner cartridge or drum cartridge,

do not allow dust, water, or liquids to come in contact
with the drum. This may affect print quality.

R For optimal performance, genuine Panasonic toner

cartridges and drum cartridges are recommended.
We cannot be responsible for problems that may be
caused by a non-Panasonic toner cartridge or drum
cartridge:
– Damage to the unit
– Poor print quality
– Improper operation

Toner cartridge
R Do not leave the toner cartridge out of the protective

bag for a long time. It will decrease the toner life.

Drum cartridge
R Read the instructions on page 10 before you begin

installation of the drum cartridge. After you have read
them, open the drum cartridge protective bag. The
drum cartridge contains a photosensitive drum.
Exposing it to light may damage the drum. Once you
have opened the protective bag:
– Do not expose the drum cartridge to light for more

than 5 minutes.

– Do not touch or scratch the black drum surface.
– Do not place the drum cartridge near dust or dirt,

or in a high humidity area.

– Do not expose the drum cartridge to direct

sunlight.

R To extend the life of the drum cartridge, the power

switch should never be turned OFF immediately after
printing. Leave the power turned ON for a minimum
of 30 minutes after printing.

Location
R To avoid malfunction, do not position the unit near

appliances such as TVs or speakers which generate
an intense magnetic field.

Static electricity
R To prevent static electricity damage to the interface

connectors or other electrical components inside the
unit, touch a grounded metal surface before touching
the components.

Environment
R Keep the unit away from electrical noise generating

devices, such as fluorescent lamps and motors.

R The unit should be kept free from dust, high

temperature and vibration.

R The unit should not be exposed to direct sunlight.
R Do not place heavy objects on top of the unit. When

you leave the unit unused for a long period of time,
unplug this unit from the power outlet.

For assistance, please visit http://www.panasonic.com/help

3