Panasonic KX-P1121E User Manual
Single Sheets and Envelopes
(Friction Mode)
(Friction Mode)
1.
A Turn the power on.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
B Adjust the head gap lever (A) for the
thickness of paper you are using.
thickness of paper you are using.
Position
Used for
1 or 2
Thinner sheets
3, 4, 5 and 6
Thick sheets or envelopes
1
2
3
4
5
6
2
3
4
5
6
A
B
A
2.
Set the paper feed selector (A) to the " "
position.
position.
A
3.
Raise the top cover (A) to single sheet feed
position.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
position.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
4.
Raise the paper support (A).
A
5.
Insert a sheet of paper with the printed side face
down behind the platen by aligning its left edge
down behind the platen by aligning its left edge
with
0
on the top cover.
Operating Instructions
23
Setup