Panasonic lumix dmc-fx7sg User Manual

Connecting to a PC or Printer

By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing. 

A: USB connection cable (supplied)
B: AC adaptor (DMW-CAC2; optional)

A 

• Connect the USB connection cable with 

the [

] mark facing the [

1] mark on 

the [DIGITAL] socket. 

• Hold 

C and then insert or pull the USB 

connection cable straight. 

• If the remaining battery power becomes 

low during communication, the status 
indicator turns red, starts to blink (P12) 
and the alarm beeps. In this case, stop 
the communication at once. Then turn the 
camera off, replace the battery with a 
charged one or charge the battery, or use 
the AC adaptor (DMW-CAC2; optional).

• Set the print settings such as print quality 

on the printer beforehand. Ask the 
manufacturer of the printer about the 
corresponding models. (Read the printer 
operating instructions, too.)

• It may take time to print some pictures. 

Therefore, we recommend using a battery 
with sufficient power (P12) or the AC 
adaptor (DMW-CAC2; optional) when you 
connect to a printer.

• Disconnect the USB connection cable 

after printing.

• Do not use any other USB connection 

cables except the supplied one.

When the DPOF 
Print is set. (P71)

Select [DPOF 
PICTURE]. (P88)

When the DPOF 
Print is not set.

Select [SINGLE 
PICTURE]. (P87)

FX2_7-GC-ENG.book  86 ページ  ２００４年８月４日　水曜日　午前１０時２０分