Panasonic lumix dmc-ls75 User Manual

VQT1C76

By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing 
on the LCD monitor. Make the necessary 
settings on your printer beforehand. (Read 
your printer’s operating instructions.)

• [PLEASE CONNECT TO THE PRINTER] 

appears.

USB connection cable A (supplied).

• Connect the USB connection cable with 

the [

c] mark facing the [q] mark on 

the [DIGITAL] socket.

• Hold C and then insert or pull the USB 

connection cable straight.

• Do not use any other USB connection 

cables except the supplied one.

• When you connect the camera to a 

printer without setting the mode dial to 
[

], remove the cable, set the mode 

dial to [

], turn the camera and the 

printer off and on, and connect again.

• If a card is not inserted when the camera 

is connected to the printer, you can print 
the picture data on the built-in memory. 
If a card is inserted, you can print the 
picture data on it.

• You cannot switch between the built-in 

memory and the card while the camera 
is connected to the printer. When you 
want to switch between the built-in 
memory and the card, disconnect the 
USB connection cable, insert (or remove) 
the card and then connect the USB 
connection cable to the printer again.

• To print the age in [BABY1]/[BABY2] 

and [PET] in scene mode (P47) or the 
departure date for [TRAVEL DATE] (P55), 
use the software [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] in the CD-
ROM (supplied) and print from the PC. For 
information about this, refer to the separate 
operating instructions for PC connection.

• To fi nd out more about PictBridge 

compliant printers, contact your local 
dealer.

■ To connect

A

 : USB connection cable (supplied)

B

 : AC adaptor (DMW-AC6; optional)

• It may take time to print some pictures. 

Use batteries with suffi cient battery 
power (P24) or the AC adaptor (DMW-
AC6; optional) when you connect to a 
printer.

• Make sure this unit is off before 

connecting or disconnecting the AC 
adaptor (DMW-AC6; optional).

C

 : Check the facing of the connector and 

push straight in. 

A

B

C