Panasonic mc-e471 User Manual
9
IMPORTANT: DO NOT attempt to wash the pre-filter.
4) Pre-filter cleaning / replacing
Cleaning
Replacing
NOTE: Take care not to damage the
pre-filter when removing hairs,
threads etc.
pre-filter when removing hairs,
threads etc.
To replace the pre-filter, pull it away from
the dust cover.
To install the new one, align the claws
on the edge with the arrows on the
support and push the parts together.
the dust cover.
To install the new one, align the claws
on the edge with the arrows on the
support and push the parts together.
IMPORTANT: Before re-assembling dust compartment, check that the pre-filter wiper rotates freely.
C) BLOCKAGES
If your cleaner stops picking up dust while the dust compartment is empty, a blockage may have occurred in the hose or
suction pipe inlet. If necessary, remove the obstruction in the hose or suction pipe inlet as indicated.
suction pipe inlet. If necessary, remove the obstruction in the hose or suction pipe inlet as indicated.
D) MAINTENANCE FOR THE BEATER BAR
1
2
4
3
5
NOTE: Take care not cut the brush.
Arrow
Claw
CAUTION: Ensure the cleaner is DISCONNECTED from the mains supply before any beater bar maintenance.
2
1
2
1
Suction pipe inlet