Panasonic mc-v415 User Manual
- 36 -
- 13 -
Power
Motor Protector
Height Adjust
Cord Length
120V AC (60Hz)
Yes
Auto
50 Ft. (15.25m)
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje
Protector de
Adjust de nivel
Extensión
motor
de cordón
120 V c.a. (60 Hz)
Si
Auto
15,25 m (50 pi)
Alimentation
Protecteur
Réglage de la
Cordon
du moteur
hauteur des brosses
d’alimentation
120 V c.a. (60 Hz)
Oui
Auto
15,25 m (50 pi)
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bin. If the hose
should become clogged:
vacuum cleaner carries the dirt from the
nozzle up to the dust bin. If the hose
should become clogged:
➢
➢
Unplug vacuum cleaner.
➢
➢
Press two tabs and pull open suction
inlet and check for clogging.
inlet and check for clogging.
➢
➢
Disconnect hose from short hose and
check the hose for clogging.
check the hose for clogging.
➢
➢
Plug in vacuum cleaner and turn on.
➢
➢
Stretch hose in and out to remove
clog.
clog.
➢
➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
cleaner OFF and UNPLUG POWER
CORD.
➢
➢
Remove lower plate.
➢
➢
Remove short hose from nozzle by
lifting straight up.
lifting straight up.
➢
➢
Inspect hose end and clear any
obstructions.
obstructions.
➢
➢
Reinstall short hose.
➢
➢
Reinstall lower plate.
Hose
Tabs
Tuyau
Manguera
Languettes
Langüetas
Motor Protector
Short Hose
Protector de
motor
Manguera
corta
Protecteur du
moteur
Tuyau court
Suction
Inlet
Entrée
d’aspiration
Abertura de
aspiración
Hose
Tuyau
Manguera
Hose Fitting
Conexión
para manguera
Raccord du tuyau
Removing Clogs