Panasonic nn-c1358 User Manual
19
How to release Programme Lock
INFORMATION
ACTION
1 Open Door.
The oven light will come on.
2 Press
Programme Lock Key.
Keep key pressed for 2 seconds until “P L” is
displayed.
displayed.
KEEP DOOR OPEN.
After 2 seconds....
After 3 seconds...
LOCK
LOCK
DISPLAY
A
B
1
2
3
3
A
B
1
2
3
3
Two Touch Operating Mode
The oven reverts to 2 Touch Operation mode.
Press required key number then press Start Pad.
Press required key number then press Start Pad.
Interrupted Programme
If the door is opened during a programme, once
programme lock is released, the remaining heating
time will stay in the display window until the door is
closed and Start Pad is pressed.
programme lock is released, the remaining heating
time will stay in the display window until the door is
closed and Start Pad is pressed.
Setting New Programs
Once Programme Lock is released, you can again
enter new heating programs and change the Beep
tone.
enter new heating programs and change the Beep
tone.
A
B
1
2
3
3
A
B
1
2
3
3
How to read Programme List
It is possible to check the programs that have been entered into the 16 Programme Number Pads. With the
door open, press Start Pad and Programme Number Pad 1 simultaneously (the oven will make an
acknowledging beep). After 2 seconds the display window will show each individual stage of each memory
programme in the order A1, B1, A2 etc. Finally it will display the beep tone setting and the programme lock
symbol (P L) before clearing to “0”.
* If you want to know what mode is A5 programmed,
1. After starting to show in the display from A1 press Stop/Reset Pad.
2. Press Programme Number Pad 5.
3. Press Start Pad. (The display will show from A5 pad through the following Number Pads.)
door open, press Start Pad and Programme Number Pad 1 simultaneously (the oven will make an
acknowledging beep). After 2 seconds the display window will show each individual stage of each memory
programme in the order A1, B1, A2 etc. Finally it will display the beep tone setting and the programme lock
symbol (P L) before clearing to “0”.
* If you want to know what mode is A5 programmed,
1. After starting to show in the display from A1 press Stop/Reset Pad.
2. Press Programme Number Pad 5.
3. Press Start Pad. (The display will show from A5 pad through the following Number Pads.)