Panasonic nv-apd1e User Manual
2
Information for Your Safety
WARNING
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD
AND ANNOYING INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES AND DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NOT USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD
AND ANNOYING INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES AND DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NOT USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
≥As this equipment gets hot during use, operate it in a
well-ventilated place; do not install this equipment in a
confined space such as a book case or similar unit.
confined space such as a book case or similar unit.
≥Do not open the Ink Cassette Side Cover while printing
is in progress. Your fingers could be pinched between
the thermal head arms and the Ink Cassette.
the thermal head arms and the Ink Cassette.
IMPORTANT
Please respect all copyrights.
Whatever you have recorded and created can be used
for your personal entertainment only. Under
copyright laws, other materials cannot be used
without obtaining permission from the holders of the
copyrights.
Please respect all copyrights.
Whatever you have recorded and created can be used
for your personal entertainment only. Under
copyright laws, other materials cannot be used
without obtaining permission from the holders of the
copyrights.
≥Other names, company names, and product names
printed in these instructions are trademarks or
registered trademarks of the companies concerned.
registered trademarks of the companies concerned.
Important Information
(except Clamp Filter for S-VIDEO Cable)
In order to prevent electromagnetic interference, install
the Clamp Filter (supplied) on the Cable as shown in the
figure above.
≥After passing the Cable through the Clamp Filter and
(except Clamp Filter for S-VIDEO Cable)
In order to prevent electromagnetic interference, install
the Clamp Filter (supplied) on the Cable as shown in the
figure above.
≥After passing the Cable through the Clamp Filter and
looping it around once, close the Clamp Filter until it
clicks into place.
clicks into place.
Supplied Accessories
Paper Cassette (VXA7334)
Power Cable
Paper Guard (VMP6791-2)
Clamp Filter × 2 (for VIDEO Cable and EDIT Cable)
(J0KG00000037)
(J0KG00000037)
Clamp Filter (for S-VIDEO Cable)
(J0KG00000068)
(J0KG00000068)
K2CQ2DA00002
VJA0940
K2CJ2DA00002
(NV-APD1E/EN)
(NV-APD1B)
(NV-APD1EN)
9063-VP430.book 2 ページ ２００１年８月３１日 金曜日 午後９時９分