Panasonic nv-apd1e User Manual
29
Before Requesting Service
If the trouble persists even when the action suggested
below has been taken, press the Power Button to turn off
the power or disconnect and re-connect the Power Cable.
below has been taken, press the Power Button to turn off
the power or disconnect and re-connect the Power Cable.
1:
The power cannot be switched on.
1:
The power plug is not plugged in correctly.
2:
No picture appears on the screen.
2-1: The external video source is not connected properly.
(Video Input)
2-2: The card is not properly inserted.
2-3: A card with a different format than that which can be
used by the Photo Printer is being used.
→ Pictures from the card cannot be printed with the
Photo Printer.
→ Pictures from the card cannot be printed with the
Photo Printer.
3:
The printer does not print.
3-1: The Ink Cassette is not oriented properly, or was not
pushed all the way in.
3-2: There is slack in the Ink Film.
→ Take up the slack in the Ink Film.
3-3: The Paper Cassette is not oriented properly, or was
not pushed all the way in.
3-4: The paper was loaded back and front in the reverse
side.
3-5: The internal temperature of the printer is too high.
→ Wait.
4:
Printing is not of the expected quality.
4-1: The paper being used is not of the specified type.
4-2: The paper was not loaded correctly.
4-3: Thermal head is dirty.
4-4: Condensation has formed.
→ Wait.
5:
The printed colours are not right.
5:
The print image has not been adjusted correctly.
6:
The printed pictures are distorted.
6-1: The printer is located near a television, video game,
or other source of electromagnetic waves.
→ Move the printer so that it is at least one meter
away from the television, video game, etc.
→ Move the printer so that it is at least one meter
away from the television, video game, etc.
6-2: The printer is located near a stereo speaker, large
motor, or other source of a strong magnetic field.
→ Move the printer away from the device generating
the magnetic field.
→ Move the printer away from the device generating
the magnetic field.
7:
Pressing the MEMORY button does not store the
picture in memory.
picture in memory.
7:
The MEMORY screen is displayed.
→Press the DISPLAY button and change over to the
INPUT screen.
→Press the DISPLAY button and change over to the
INPUT screen.
8:
The printer does not respond when a button is
pressed.
pressed.
8-1: The internal temperature of the printer is too high.
→ Wait.
8-2: Printing is in progress.
→ Wait until printing is complete.
9:
Paper jams occur frequently.
9-1: More than 36 sheets of paper (or 25 sheets of 9 ×
12 cm printing paper) have been loaded in the Paper
Cassette.
Cassette.
9-2: The paper is creased or curled.
10: The MENU screen does not appear.
10: Printing is in progress.
→ Wait until printing is complete.
11: It takes a long time for an image to appear.
11: Depending on the image system for storing images in
the card and its capacity, it can take 20 to 30
seconds to display the image.
→ This is not a malfunction.
seconds to display the image.
→ This is not a malfunction.
12: Pictures found using Date Search cannot be
printed as a batch.
12: After finding the pictures through Date Search, you
did not return to the MENU screen and choose
[Batch] on [BASIC] to [Selected pictures].
[Batch] on [BASIC] to [Selected pictures].
13: The number is different than that selected in
[Number], under [OPTION].
13: The printer is performing a DPOF print.
→ Only the number of pages configured with DPOF
will be printed.
will be printed.
14: Images stored in a card cannot be copied.
14-1:There are no images stored in the card.
14-2:The INPUT method was not correctly selected.
14-3:The card is write-protected.
14-4:The card's memory has been used up.
15: Images in the card cannot be erased.
15-1:There are no images stored in the card.
15-2:The INPUT method was not correctly selected.
15-3:The picture is set to write-protect in the camera or
computer.
→ Change the write-protect setting in the camera or
computer, and then erase.
→ Change the write-protect setting in the camera or
computer, and then erase.
16: The video image was stored in the card, but the
image is not clear.
16: In some cases, image compression may deteriorate
the quality of image when storing.
→ This is not a malfunction.
→ This is not a malfunction.
17: Video images cannot be recorded in the card.
17-1:The INPUT method is not set to [Video].
17-2:The card is set to write-protect.
17-3:The card’s capacity is full.
→ Either erase unnecessary images, or use another
card with sufficient capacity.
card with sufficient capacity.
9063-VP430.book 29 ページ ２００１年８月３１日 金曜日 午後９時９分