Panasonic nv-fj732f User Manual

(For NV-FJ732F and NV-FJ632F)
If you are connecting your VCR to a TV equipped with the 
[Q Link]

*1

 function, then follow the steps. 

For a TV equipped with the [DATA LOGIC]

*2

, [Easy Link]

*3

, 

[Megalogic]

*4

 or [SMARTLINK]

*5

 function and with a 21-pin 

Scart socket, also read from this page.
For details about the connections, also read TV’s operating 
instructions.

 1 AV1 21-pin Scart socket
 2 Aerial Input socket
 3 Aerial Output socket
 4 Aerial (not supplied)
 5 Aerial lead (not supplied)
 6 TV equipped with the Q Link (not supplied) 
 7 Aerial Input socket
 8 21-pin Scart socket
 9 RF Coaxial cable (supplied)
10 Fully-wired 21-pin Scart cable (supplied)

Hints:
• Q Link is an advanced system that offers a range of convenient 

functions such as automatic copying of the tuning position of all 
available TV stations into your VCR’s memory (this is called 
Download) if you connect the VCR to your TV with a fully-wired 
21-pin Scart cable (supplied). Depending on the manufacturer, the 
equivalent of the Q Link function has a different name and may not 
work exactly the same. 

*1

[Q Link] is a registered trademark of Panasonic.

*2

[DATA LOGIC] is a registered trademark of Metz.

*3

[Easy Link] is a registered trademark of Philips.

*4

[Megalogic] is a registered trademark of Grundig.

*5

[SMARTLINK] is a registered trademark of Sony.

For details, refer to your TV’s operating instructions or consult your 
dealer.
• Unlike in most commercially sold 21-pin Scart cables, in fully-wired 

21-pin Scart cables all 21 pins of one plug are connected to the 
matching pin of the plug on the other end of the cable. 

First of all, make sure that the VCR is switched off.

1) Switch the TV on.

The TV starts to tune all available TV stations and to 
adjust the clock.

• When the TV has finished its 

own auto setup, the VCR is 
automatically switched on, and 
the downloading of the setup 
data from the TV to the VCR 
starts. (Applicable to TVs with 
[Q Link] or [DATA LOGIC] 
function)

If your TV is equipped with the 
[Easy Link], [Megalogic] or 
[SMARTLINK] function, the 
Country setting menu appears 
on the TV screen. Press the 
[Cursor] 

3421 to select 

the desired country and the 
[OK] 

• The downloading automatically starts.

When the indication appears on 
the VCR display, the 
downloading is complete. 

Note:
• If you accidentally switch on the VCR before the TV, downloading 

of the setup data from the TV may not be performed correctly. In 
this case, follow the operation steps.

1) Wait until the Auto Setup is complete on both the TV and 

the VCR.

2) Press the [MENU] 

(7) to display the Main menu on the 

TV screen.

3) Press the [Cursor] 

3421 to select [Tuning] and 

then [Download].

4) Press the [OK] 

(24) twice. Downloading of the setup data 

from the TV to the VCR starts.

5) When the programme position and the current time 

appear in the VCR display, downloading is complete.

Hints:
• If you use a Panasonic TV, starting the downloading of the setup 

data will automatically display the [Download] indication. However, 
in case of a TV of another make, the [Download] indication may not 
appear. In this case, select the AV input on your TV if you want to 
see the [Download] indication.

• If you select [Schweiz], [Suisse] or [Svizzera] on the Country 

setting menu, the other setting menu appears automatically to let 
you set [Power save] to [ON]. In this setting, the VCR’s power 
consumption is minimised when it is off (Standby mode). To turn 
the VCR on, keep the [VCR-ON/OFF] 

 pressed on the VCR 

main unit, not with the remote control.

1

2

3

4

5

6

7

8

9

:

Download in
progress,
please wait.

Position

67

Download

Panasonic VCR

Country

Belgien
Belgique
België
Danmark
España 
Ελλάδα
France
Italia
Nederland
Norge

Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others

Panasonic VCR