Panasonic nv-fj732f User Manual

1) Insert a video cassette with an intact erasure prevention 

tab.
• If it has already been inserted, press the [VCR-ON/

OFF] 

(1) to turn the VCR on.

2) Select the TV station using the [Channel] 

(33). (Set the [VCR/TV] (23) to [VCR].)
• It is also possible to select by pressing 

3) Press the [REC] 

(28) to start recording.

4) Press the [Stop] 

(9) to stop recording.

Press the [SP/LP/EP] 

(21) before recording.

• SP provides standard recording time and 

optimum picture quality.
LP provides double recording time with 
slightly reduced picture quality. 
EP provides triple recording time with slightly reduced 
picture quality.

Press the [Pause/Slow] 

(29) during 

recording.
Press it again to continue recording.

After pressing the [REC] 

(28) to start recording, select on 

your TV the programme position of the TV programme that 
you want to view.

Notes:
• When playing back an E300 cassette recorded in the LP or EP 

mode, some picture distortion may occur. However, this is not a 
malfunction.

• The recording pause mode will be automatically cancelled after 5 

minutes and return to the stop mode.

• The tape recorded in the EP mode on this VCR cannot be played 

back on the other VCR without EP mode function.

• On the other VCR (even with EP mode function), when you play 

back the tape recorded in the EP mode, the picture may be 
distorted. However, this is not a malfunction.

See page 18 to set the tape length.

Press the [OSD/DISPLAY] 

(18) repeatedly until the 

remaining tape time appears on the VCR display.

• Pressing the [OSD/DISPLAY] 

 once makes the On Screen 

Display appear; after that, pressing it repeatedly changes the 
indication in the following order.

• For certain cassettes, the remaining tape time may not be 

displayed correctly.

Clock

#Counter#Remaining Tape Time#Clock

1) Press the [REC/OTR] 

(48) to start recording.

2) Press the [REC/OTR] 

(48) on the VCR repeatedly to 

select the desired recording duration.
• Every time you press this button, the recording duration 

indicated in the VCR display changes in the following 
order.

Counter display (normal recording mode)
#30 (min.)#60 (min.)#120 (min.) 

#180 (min.)#240 (min.) 

#Counter display (normal recording mode)

To stop the OTR recording before the end
Press the [Stop] 

(9). 

Note:
• This function also works during Direct TV Recording. (For NV-

FJ732F and NV-FJ632F)

Break out the erasure prevention 
tab after recording.

If you insert a video cassette with a 
broken out erasure prevention tab 
and press the [REC] 

(28), the [

1] 

indication flashes on the VCR 
display to indicate that recording is not possible.
In this case, cover the tab hole with two layers of adhesive 
tape.

(For NV-FJ732F and NV-FJ632F)
This function allows you to immediately start recording the 
same programme that you are viewing on the TV.
The programme position selected on the VCR automatically 
changes to that of the TV programme that you are viewing 
on the TV.
• Your TV must be equipped with the [Q Link] function.
• The VCR must be connected to the TV via a fully-wired 

21-pin Scart cable.

1) Press the [DIRECT TV REC] 

(36).

• Recording of the TV programme that you are viewing on 

the TV starts.

• In some cases, it may not be possible to change the 

programme position on the TV during Direct TV 
Recording.

• Do not press the [AV LINK] 

(35) during Direct TV REC, 

otherwise the recording may not be performed correctly.

2) Press the [Stop] 

(9) to stop recording.

REC

SP

REC

REC