Panasonic nv-gs15ege User Manual
Before Use
-12-
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
(38)
toward
the front and pull down to fully open the
Cassette Compartment Cover.
≥To protect the tape, if the cover is not fully
Cassette Compartment Cover.
≥To protect the tape, if the cover is not fully
opened, the cassette cannot be ejected.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark
[PUSH] mark
1.
4
Close the Cassette Compartment Cover.
ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1 on the cassette (by sliding it to the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it to the [REC] arrow
direction).
1 on the cassette (by sliding it to the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it to the [REC] arrow
direction).
≥For other notes concerning this item, see
-47-
.
OPEN/
EJECT
(38)
PUSH
1
R E C
SAVE
1
Using a Card (NV-GS15 only)
A Card can be used to record pictures.
Before inserting or removing a Card, be sure
to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function
to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function
properly or it may cause the loss of recorded
data in a Card.
data in a Card.
ª Inserting a Card
1
1
Slide the [OPEN] Lever
(3)
to open the Card
Slot Cover
(5)
.
2
While holding the Memory Card with its cut
corner facing right
corner facing right
1, insert it into the Card
Slot
(4)
.
3
Close the Card Slot Cover
(5)
securely.
Removing the Card
Open the Card Slot Cover and press the centre of
the Card and then pull it straight out.
≥After removing the Card, close the Card Slot
Open the Card Slot Cover and press the centre of
the Card and then pull it straight out.
≥After removing the Card, close the Card Slot
Cover.
≥The Movie Camera may be damaged if the
Card is forced out when the Card is fully
inserted.
inserted.
ª Card Access Lamp
(14)
While the Movie Camera is accessing the Card
(reading, recording, playback or erasing), Card
Access Lamp lights up.
≥While Card Access Lamp is on, never attempt
(reading, recording, playback or erasing), Card
Access Lamp lights up.
≥While Card Access Lamp is on, never attempt
to open the Card Slot Cover, to pull out the
Card, to turn off the Movie Camera, or to turn
the Mode Dial. Such actions will damage the
Card, and recorded data, and cause the Movie
Camera to malfunction.
Card, to turn off the Movie Camera, or to turn
the Mode Dial. Such actions will damage the
Card, and recorded data, and cause the Movie
Camera to malfunction.
OPEN
(3)
(5)
1
(4)
RESET
(14)
15EGE-ENG.book 12 ページ ２００４年２月９日 月曜日 午前１１時１０分