Panasonic nv-gs15ege User Manual

Others

PUSH THE RESET SWITCH:

An irregularity in the mechanism has been 
detected. Press the [RESET] Button 
(

, 

). This may solve the problem.

CARD FULL:

Card does not have sufficient memory 
remaining.
Select Picture Playback Mode and delete 
unnecessary files.

NO CARD:

Card is not inserted.

NO DATA:

There is no recorded files in the Card.

UNPLAYABLE CARD:

You are attempting to play back a data 
which is not compatible with this Movie 
Camera.

CARD ERROR:

This Card is not compatible with this Movie 
Camera.

COPY INHIBITED:

Because the medium is protected by a copy 
guard, images cannot be recorded 
correctly.

INCORRECT OPERATION:

The Recording Start/Stop Button is pressed 
without connecting the USB cable to the PC 
in Picture Playback Mode. 

CAN NOT USE USB CHANGE MODE:

The USB cable is connected to the Movie 
Camera in Card Recording Mode or Picture 
Playback Mode.

CAN NOT OPERATE:

You are attempting to record pictures on a 
Card with connecting the USB cable to the 
Movie Camera in Tape Recording/Playback 
Mode.

UNABLE TO WRITE
(MULTI RECORDING):

The [PHOTO SHOT] Button is pressed 
when you are recording pictures on a Tape 
with setting the Digital Effect [MULTI] of 
[EFFECT1].

UNABLE TO WRITE:

The Recording Start/Stop Button is pressed 
when you are recording still pictures on the 
Card. 

CASSETTE DOOR OPENED:

Close the Cassette Compartment Cover 
before recording.

NO TITLE:

Titles are not recorded.

UNABLE TO WRITE
(WIDE MODE):

You are attempting to record pictures of S1 
signal (with aspect ratio 16:9) by pressing 
the [PHOTO SHOT] Button.

FILE LOCKED:

You are attempting to erase protected 
pictures.

CARD LOCKED:

The write protection switch on the SD 
Memory Card is set to [LOCK].

DISCONNECT USB CABLE:

You are attempting to turn the Mode Dial or 
turn the Movie Camera off in PC Mode with 
connecting the USB cable to the Movie 
Camera.

ª Concerning the Power Supply

≥When the Movie Camera is used for a long time, 

the Camera body becomes warm, but this is not 
a malfunction.

≥If the [CHARGE] Lamp does not light up 

although the Battery is attached to the AC 
Adaptor, detach the Battery and reattach it.

ª Inserting/Removing the Cassette

≥In the case of using a previously recorded 

Cassette, you can use the Blank Search 
Function to find the position where you want to 
continue recording.

≥If a new Cassette is inserted, rewind to the 

beginning of the tape before starting recording.

≥When inserting the cassette, make sure it faces 

in the right direction and then push it in until it 
stops.

≥When the Cassette Holder is in action, do not 

touch anything except the [PUSH] mark.

≥When closing the Cassette Compartment 

Cover, do not get anything caught in the cover, 
such as a cable of an optional stereo 
microphone.

ª Alarm Sounds

When [BEEP SOUND] on the [INITIAL] 
Sub-Menu on the [TAPE RECORDING MENU] is 
set to [ON], confirmation/alarm beeps are issued 
as follows.
1 Beep
≥When you start recording
≥When you switch the [OFF/ON] Switch from 

[OFF] to [ON]

2 Beeps
≥When you pause recording
2 Beeps 4 times
≥If you perform a wrong operation before or 

during recording

15EGE-ENG.book  47 ページ  ２００４年２月９日　月曜日　午前１１時１０分