Panasonic nv-fj626 User Manual

VCR

TV

  Aerial

(not supplied)

21-pin Scart cable

(not supplied)

RF Coaxial Cable

(supplied)

n The RF (radio frequency) coaxial cable must be connected for TV

reception, even if the video recorder is already connected with
a 21-pin Scart cable.

n More information about the remote control buttons and of cursors,

see page 4-5.

Set up the connections shown here, and connect the mains lead
(supplied) to your AC mains.

If you want to connect the TV
only with a RF Coaxial Cable
(supplied), you must ensure that
the video output channel is adjusted
to the input channel of the TV.

For this purpose, please also read
the operating instructions for your TV.

n Switch on the VCR 
n Press the m Button for about 7

seconds until the number of the channel
appears on the VCR display
(the pre-setting is channel 36).

n Tune the TV until the test screen appears.

A distorted picture on the 

channel can be

reduced, by adjusting the VCR and the TV
to another channel.

n Use this button to select

the channel number (e.g. channel 39).

n Tune the TV until the test screen appears.
n To store this adjustment, press o .
n After that, please continue with the

Automatic Setting
with the [Country] setting menu.

On Screen Display

VCR

Ch:36

 

VCR display

Automatic Setting without Q Link
n Switch on the VCR 

and the [Country] setting menu will appear.

n Use the cursors :;8 9 on the

remote control to select your country.

n After pressing o, all the TV stations

which can be received will be tuned
automatically in about 5 minutes.

n When the menu  [Clock setting] appears,

use the cursors :;8 9 on

the remote control to select
the Time and Date manually.

n To end this procedure, press o.
n To cancel this settings press e.

n If the selection for the Country menu does not appear

after switching on the VCR, you can restart the  Automatic Setting;
see page 8.

n An incorrect setting of Time or Date (observe summer- and wintertime)

will influence the Timer recording.

n If you select the country [Suisse] the menu [Power save] will appear.

Select the settings with the cursors :; and store with o .

More information see on page 9.

€

(for NV-FJ631, NV-FJ630, NV-FJ626)

n Following systems from other manufacturers

have similar function with Q Link from Panasonic.

n List of registered trademarks:

Q Link (Panasonic), DATA LOGIC (Metz), Easy Link (Philips),

Megalogic (Grundig), SMARTLINK (Sony)

On Screen Display

RF Coaxial Cable

(supplied)

TV

VCR

AV

RF IN

RF OUT

VCR

Ch:39

Automatic Setting with Q Link
(for NV-FJ631, NV-FJ630, NV-FJ626)
If your TV is equipped with Q Link or with a similar function from other
manufacturers (see notes), the TV programme positions can be
downloaded with a fully-wired 21-pin Scart cable (not supplied).

The programme positions must be tuned on the TV first.

n Connect the Scart cable.

n Set the AV channel of the TV.

n Set the remote control to VCR.

n Switch on the VCR   .

n Downloading of the TV data starts.

n When the indication appears on

the VCR display, the downloading
is complete.

On Screen Display

 

VCR display

Manual download start
(for NV-FJ631, NV-FJ630, NV-FJ626)

n Set the AV channel of the TV.

n press m

n Select [Tuning] ;

n Access by pressing o

n Select [Download];

n Press o

n Confirm by pressing o

n When the indication appears on

the VCR display, the downloading
is complete.