Panasonic nv-fj626 User Manual

Switch on the TV to the video output channel, insert a cassette with an
intact erasure prevention tab into the VCR and set the remote control
to VCR operation.

n Press 
n Enter the ShowView number.

For correction use  8 .

n To access [Timer recording], press o .
n If the channel name is not set

automatically, select your Channel [Pos]
:; and store with o .

The name of channel will be saved.
To modify the [Name], see page 10.

n Set the Tape Speed

SP, LP, EP or A (automatic).

n Check the Remaining tape time.
n To store the programme, press o .

&

To preset other recordings
repeat the procedure.

n Press 

 to switch the VCR

to Standby mode. Make sure that
the VCR display 

i

   appears.

For more information, see page 6.

To cancel Standby mode for Timer recording,

press 

 and the VCR display 

i

 will disappear..

Now you can playback a cassette or make a recording.

After that, you must press the button again to switch
the VCR to the Standby mode for Timer recording.

Programme List
The List of the Timer recordings are stored if:

n the recordings are longer than 15 minutes (EP mode 25 minutes)

n the cassette was not removed of the VCR.

n Press 

 to display the [Programme List].

n Select the programme :; .

n By pressing the SEARCH Button again, the VCR will wind

the tape to the selected programme and start to playback.

n If you select another programme, press the SEARCH Button again,

the playback will stop and the [Programme List] will appear.

n Press 

 to quit the menu.

Note:
If you have removed the cassette, or the power supply
was interrupted, the Intro Jet Scan will be activated when pressing
the SEARCH Button (see page 8).

To check the Timer recording,

n press 

 to display the  [Timer recording]  menu.

n Press 

 to quit the menu.

To delete or change a Timer recording,

n press 

 to display the [Timer recording]  menu.

n Use :; to select the entry to be changed.

n Press 

 to delete the Timer recording.

n Use the relevant function buttons

to change the entries.

n Press o to store these changes.

n Press 

 to quit the menu.

(not for NV-FJ623)

To set easily the Timer for programmes often broadcasted on the same
channel and time each day (for example series), the Intelligent Timer
Function remembers the channel number along with the start and end times
of the last 8 programmes that you have recorded using Timer Recording.

n Press 
n To select the programme :;

n Press 

  to switch the VCR

to Standby mode for 

If you want to modify the data first, follow the next steps.

n If more than 8 programmes are stored, the oldest

data will be lost. To delete recording data manually, press 

.

n To protect a programme press 9 and the lock symbol   will appear..

To unlock a programme press 8 .

n To modify the data, press o and Timer recording Menu will appear.

n Change the data :;8 9.
n Press 

  to switch the VCR

to Standby mode for 

For more information, see page 6.

n These functions can be also

used with the VCR buttons:   

, 

n When [Shipping condition], [Auto - Setup Restart] etc. is done,

Intelligent Timer data will be lost.

n To use Intelligent Timer Function, at least one timer recording has to be done.

•

is a trademark of Gemstar Development Corporation. The 

•

system is manufactured under licence from Gemstar Development Corporation.

 =