Panasonic nv-fj730b User Manual

If you do not have any scart leads and your TV is not Q Link type, you can connect your VCR to a TV and 
Satellite Receiver using RF leads.
Using this connection method may however be difficult to obtain a clear picture from the Satellite Receiver. 
For this reason it is not recommended for inexperienced users.
(See preferred connection on page 6.)

Connect the aerial to the aerial input socket of the Satellite 
Receiver.
• If you do not have a Satellite Receiver, connect the aerial to 

the RF Input socket of the VCR and go to step 3.

Connect the aerial from Satellite Receiver to the RF Input 
socket.

Connect the RF Output socket to the TV aerial socket.

Plug the TV, VCR and Satellite Receiver into the mains as 
shown at top of the page.

Notes:
• If you have an analogue satellite receiver, select [SKY ONE] or [SKY NEWS] on the receiver before starting Auto Setup. 

After Auto Setup is complete, the satellite position will be shown as [SAT] in the channel listing to denote programmes from the 
satellite receiver.

• If you have a digital satellite receiver, you can start Auto Setup with the receiver set to any channel. 

We recommend to manually name the [SAT] position after Auto Setup is complete. (See page 32.)

To AC Mains socket

RF lead (supplied)
• Must be connected to 

watch TV channels.

TV (not supplied)

RF lead 
(not supplied)

Aerial 
(not supplied)

Aerial Input socket

Satellite Receiver (not supplied)

Aerial Output socket

RF Input socket

RF Output socket

AC Mains lead (supplied)

AC Input socket

To AC Mains socket

Aerial Input 
socket

Example of NV-FJ780B

Satellite Receiver

Satellite Receiver

VCR

VCR

TV

IN

ENT

RF

ANT

 OUT

SORTIE

IN

ENT

RF

ANT

 OUT

SORTIE