Panasonic nv-gs22ege User Manual
Before Use
-14-
Playback Functions Sub-Menu
[SEARCH]
Index Search Mode
[SEARCH]
Index Search Mode
-30-
[12bit AUDIO]
Audio Selector
Audio Selector
-33-
[AUDIO OUT]
Audio Output Mode
Audio Output Mode
-39-
2) [DIGITAL]
Playback Digital Setup Sub-Menu
[EFFECT ON]
Digital Effect On/Off
Playback Digital Setup Sub-Menu
[EFFECT ON]
Digital Effect On/Off
-31-
[EFFECT SEL]
Digital Effect Selection
Digital Effect Selection
-31-
3) [RECORDING]
Recording Setup Sub-Menu
[REC SPEED]
Recording Speed Mode
Recording Setup Sub-Menu
[REC SPEED]
Recording Speed Mode
-14-
[AUDIO REC]
Audio Recording Mode
Audio Recording Mode
-15-
4) [DISPLAY]
Display Setup Sub-Menu
≥All of the items on the [DISPLAY] Sub-Menu are
Display Setup Sub-Menu
≥All of the items on the [DISPLAY] Sub-Menu are
the same as those on the [DISPLAY] Sub-Menu
of the [TAPE RECORDING MENU] Main-Menu.
of the [TAPE RECORDING MENU] Main-Menu.
5) [LCD/EVF]
Adjusting Brightness and Colour Level
[LCD/EVF SET]
LCD and Viewfinder Adjustment
Adjusting Brightness and Colour Level
[LCD/EVF SET]
LCD and Viewfinder Adjustment
-12-
[EVF ON/AUTO]
Using the Viewfinder
Using the Viewfinder
-11-
6) [INITIAL]
Initial Setup Sub-Menu
[BLANK SEARCH]
Blank Search
Initial Setup Sub-Menu
[BLANK SEARCH]
Blank Search
-17-
[AV JACK]
AV Socket
AV Socket
-44-
[REMOTE]
Remote Controller Mode
Remote Controller Mode
-8-
[REC LAMP]
Recording Lamp
Recording Lamp
-16-
[BEEP SOUND]
Beep Sound
Beep Sound
-36-
Setting Date and Time
Since the internal clock of the Movie Camera has
a slight imprecision, make sure to check the time
before recording.
a slight imprecision, make sure to check the time
before recording.
MENU
STILL
ENTER
FADE
i
s
(14)
1
Set [INITIAL] >> [CLOCK SET] >> [YES].
2
Press the [
;/∫] Button to select [YEAR],
[MONTH], [DAY], [HOUR] or [MIN.] and
press the [
press the [
6/5] Button to set it to the
desired value.
≥Year will cycle in the order shown below.
≥Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
(14)
to finish
setting the date and time.
≥The clock operation starts from [00] second.
≥The clock operation starts from [00] second.
≥If the built-in battery is weak, the [
0] Indication
flashes. In this case, charge the built-in battery.
≥The clock uses the 24-hour system.
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation
of the clock. When the [
of the clock. When the [
0] Indication flashes,
the internal lithium battery is near exhaustion.
1
Connect the AC Adaptor to the Movie
Camera with the power turned off and then
connect to the AC Mains socket.
Camera with the power turned off and then
connect to the AC Mains socket.
≥After charging for 4 hours, the built-in lithium
battery can power the clock for approximately
3 months.
3 months.
LP Mode
A desired recording speed can be selected with
[REC SPEED] on the [RECORDING] Sub-Menu.
If LP Mode is selected, the recording time
becomes 1.5 times longer than that of SP
Mode.
Although the image quality does not decrease
with the LP Mode recording, mosaic-pattern noise
[REC SPEED] on the [RECORDING] Sub-Menu.
If LP Mode is selected, the recording time
becomes 1.5 times longer than that of SP
Mode.
Although the image quality does not decrease
with the LP Mode recording, mosaic-pattern noise
CLOCK SET
;
/∫:SELECT &/%:SETUP
!
/MENU:EXIT
1
YEAR 2004
MONTH 10
DAY 8
HOUR 14
MIN. 30
33EGE-ENG.book 14 ページ 2004年2月9日 月曜日 午前9時55分