Panasonic nv-gs33gc User Manual
Others
-76-
ª To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
-52-
)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. (
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. (
-52-
)
ª Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Portrait Mode is used
Function in the following cases.
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Portrait Mode is used
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
shipping condition.
1
Set [INITIAL] >> [INITIAL SET] >> [YES].
≥The initializing takes a little while.
≥After the initializing is completed, the
≥The initializing takes a little while.
≥After the initializing is completed, the
[COMPLETED] Indication appears with
beeps.
beeps.
≥Initializing will not erase the clock setting (
-53-
)
that has been adjusted.
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
3DEW (DEW DETECT/EJECT TAPE):
flashes, please check the condition of the Movie
Camera.
3DEW (DEW DETECT/EJECT TAPE):
Condensation has occurred.
-81-
Y (CHECK REC TAB/TAPE NOT INSERTED):
You are attempting to record pictures on a
Tape with setting the accidental erasure
prevention slider to [SAVE].
You are attempting Audio dubbing or Digital
dubbing on a Tape with setting the
accidental erasure previntion slider to
[SAVE].
No Cassette is inserted.
Tape with setting the accidental erasure
prevention slider to [SAVE].
You are attempting Audio dubbing or Digital
dubbing on a Tape with setting the
accidental erasure previntion slider to
[SAVE].
No Cassette is inserted.
-49-
6 (LOW BATTERY):
The Battery is low. Recharge it.
-47-
0: The built-in battery is low.
-53-
: (NEED HEAD CLEANING):
The video heads are dirty.
-81-
2END (TAPE END):
The tape came to the end during recording.
REMOTE (CHECK REMOTE MODE):
Wrong Remote Controller Mode has been
selected.
selected.
-46-
UNPLAYABLE TAPE
(OTHER FORMAT):
(OTHER FORMAT):
You are attempting to play back a tape
section that has been recorded with a
different TV system.
section that has been recorded with a
different TV system.
UNABLE TO A. DUB
(LP RECORDED):
(LP RECORDED):
Because the original recording was done in
LP Mode, audio dubbing cannot be
performed.
LP Mode, audio dubbing cannot be
performed.
INCOMPATIBLE TAPE:
This cassette is incompatible.
PUSH THE
RESET SWITCH:
RESET SWITCH:
An irregularity in the mechanism has been
detected. Press the [RESET] Button (
detected. Press the [RESET] Button (
-44-
).
This may solve the problem.
COPY INHIBITED:
Because the medium is protected by a copy
guard, images cannot be recorded
correctly.
guard, images cannot be recorded
correctly.
CASSETTE DOOR OPENED:
Close the Cassette Compartment Cover
before recording.
before recording.
Notes and Hints
ª Concerning the Power Supply
≥When the Movie Camera is used for a long time,
the Camera body becomes warm, but this is not
a malfunction.
a malfunction.
≥If the [CHARGE] Lamp does not light up
although the Battery is attached to the AC
Adaptor, detach the Battery and reattach it.
Adaptor, detach the Battery and reattach it.
ª Inserting/Removing the Cassette
≥In the case of using a previously recorded
Cassette, you can use the Blank Search
Function to find the position where you want to
continue recording.
Function to find the position where you want to
continue recording.
≥If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥When inserting the cassette, make sure it faces
in the right direction and then push it in until it
stops.
stops.
≥When the Cassette Holder is in action, do not
touch anything except the [PUSH] mark.
≥When closing the Cassette Compartment
Cover, do not get anything caught in the cover,
such as a cable of an optional stereo
microphone.
such as a cable of an optional stereo
microphone.
ª Alarm Sounds
When [BEEP SOUND] on the [INITIAL]
Sub-Menu on the [TAPE RECORDING MENU] is
Sub-Menu on the [TAPE RECORDING MENU] is
33GC-ENG.book 76 ページ 2004年2月25日 水曜日 午後2時50分