Panasonic NV-GS5B User Manual

ª To Change the Counter Display Mode

By changing [C.DISPLAY] on the [DISPLAY SETUP] 
Sub-Menu, you can change the Counter Display Mode to 
Tape Counter Indication [COUNTER] (0:00.00), Memory 
Counter Indication [MEMORY] (M0:00.00), and Time Code 
Indication [TIMECODE] (0h00m00s00f). 

l 12) By 

repeatedly pressing the [COUNTER] Button on the Remote 
Controller, you can change the Counter Display Mode.

ª To Display Date/Time Indication

To display Date/Time Indication, set the appropriate 
Date/Time in [DATE/TIME] on the [DISPLAY SETUP] 
Sub-Menu. 

l 12)

You can also press the [DATE/TIME] Button of the Remote 
Controller repeatedly to display or change the Date/Time 
Indication.

ª To Change the Display Mode

By changing [DISPLAY] on the [DISPLAY SETUP] 
Sub-Menu, you can change the Display Mode to All Function 
Display [ALL], Partial Display [PARTIAL] and Minimum 
Display [OFF].

You can register your name and address in your Movie 
Camera to identify the owner.

≥The [OWNER ID] Menu appears.

≥You can input 4 digits.

∫

∫

∫

∫]

≥You can input up to 12 characters in [NAME], and up to 

11 characters in [POSTCODE].

∫

≥Keep pushing the Operation Lever towards [;] for 

approximately 5 seconds.

If Owner ID has already been set, carrying out Step 1 above 
will display [INPUT PIN NUMBER] on the screen. Input the 
Pin Number you have already selected. If the number is not 
correct, the screen will not change. If the number is correct, 
the contents of the setup will be displayed. (By repeating 
Steps 2 to 4 above, you can change the contents.)

If any one of the following indications lights up or flashes, 
please check the condition of the Movie Camera.
≥Some Indications may not be displayed according to the model.
3:

Condensation has occurred.

l 49)

Y:

The accidental erasure prevention 
slider on the inserted Cassette is 
open (that is, set to [SAVE]).
You are about to do audio dubbing 
on the unrecorded (blank) portion of 
the tape.
No Cassette is inserted.

l 10)

6:

The Battery is low. Recharge it.

l 9)

0:

The built-in battery is low.

l 16)

::

The video heads are dirty.

l 49)

2END:

The tape came to end during 
recording.

REMOTE:

Wrong Remote Controller Mode has 
been selected. 

l 8)

PRINTER ERROR:

The Video Printer is not connected 
correctly, or the Video Printer is not 
functioning properly.

UNPLAYABLE TAPE
(OTHER FORMAT):

You are attempting to play back a 
tape section that has been recorded 
with a different TV system.

UNABLE TO A. DUB
(LP RECORDED):

Because the original recording was 
done in LP Mode, audio dubbing 
cannot be performed.

INCOMPATIBLE
TAPE:

This Cassette is incompatible.

PLEASE RE-OPERATE
AFTER PUSHING 
RESET BUTTON:

Mechanism Irregular is detected. 
Press the [RESET] Button 

l 6). 

This may solve the problem.
You are attempting to record to a 
Memory Card formatted with an 
other equipment (like a Personal 
Computer). Format the Memory 
Card with this equipment.

TO SERVICE:

It is a malfunction.

CARD FULL:

Card does not have sufficient 
memory remaining.
Select Card Mode and delete 
unnecessary files.

NO CARD:

Card is not inserted.

NO FILE:

Card has no files recorded on it.

CARD ERROR:

This Card is not compatible with this 
Movie Camera.

COPY INHIBITED:

Because the medium is protected by 
a copy guard, images cannot be 
recorded correctly.

INCORRECT 
OPERATION:

You are attempting to record to a 
tape in VCR Mode.
In NV-GS5, 
[TAPE/CARD/CARD MODE] 
Selector is set to [MPEG4] or 
[VOICE] when [PHOTO SHOT] 
Button is pressed.
You are attempting to record to a 
tape in Card Mode.

ª Concerning the Power Supply

≥When the Movie Camera is used for a long time, the 

Camera body becomes warm, but this is not a malfunction.

≥If the [CHARGE] Lamp does not light up although the 

Battery is attached to AC Adaptor, detach the Battery and 
reattach it.

≥Battery CGP-D110 and CGP-D105 cannot be charged with 

this AC Adaptor.

B.book  43 ページ  ２００２年１月２８日 月曜日 午後３時４８分