Panasonic nv-hv22gn User Manual

Preparations
• Confirm that the VCR is on.
• Confirm that the TV is on and the VCR viewing channel is 

selected.

• Insert a recorded video cassette.

For Normal Playback:
Press [PLAY] 

(8).

For Cue or Review Playback:
During playback, tap [Fast Forward] 

(27) or 

• To return to normal playback, press [PLAY] 

(8).

• If you press and hold down [Fast Forward] 

or [Rewind] 

(10), cue or review playback 

continues for as long as you keep the button 
pressed, and operation returns to normal 
playback when the button is released.

For High speed Cue or Review Playback (JET SEARCH):
During playback, tap [Fast Forward] 

(27) or [Rewind] (10) 

twice.

For Still Playback:
During playback, press [PAUSE/SLOW] 

(29).

• To return to normal playback, press [PLAY] 

(8) 

For Slow Playback:
During playback, keep [PAUSE/SLOW] 

(29) 

pressed for 2 seconds or more.
• To return to normal playback, press [PLAY] 

(8).

Fast-forwarding or Rewinding the Tape:
Press [Fast Forward] 

(27) or [Rewind] (10) in the stop mode.

• To stop fast-forwarding or rewinding, press [STOP] 

To Obtain a Higher Speed Rewind (Jet Rewind): 
Press [JET REW] 

(11).

The [J . REW] indication appears on the TV screen. 
• Depending on a cassette or an operating condition, the 

rewind speed may change somewhat.

• The tape counter is reset to [0:00] when the tape is rewound 

to the beginning.

To Stop Playback:
Press [STOP] 

Notes:
• JET SEARCH, cue, review or slow playback will be 

automatically cancelled after 10 minutes, and still playback 
after 5 minutes.

• During playback function other than normal playback, 

horizontal noise bars may appear in the picture, the colour of 
the picture may be unstable, or the picture may be otherwise 
distorted.

• When you play back a tape recorded in the LP mode, the 

picture may be in black and white. 

• When you play back a tape recorded in the EP mode, the 

picture and the sound may be unstable. 
However, these are not malfunctions.

Press [REPEAT] 

(30). 

• Press [STATUS/ NAVI CHECK] 

(32) and the [R

1] 

indication appears on screen display. (See page 7.)

• A recorded part on the tape must be at least 15 minutes 

long.

• When recording over the same location on a tape, it may not 

function correctly.

To Cancel the Repeat Playback Mode:
Press [STOP] 

Tapes recorded in the NTSC system can be played back with 
this VCR via a PAL system TV.
• Select [NTSC PB SELECT] from the On Screen Display 

according to the colour TV system of the TV. (See page 8.)

• NTSC 3.58 recording requires [NTSC INPUT SELECT] to be 

in the AUTO or 3.58 position (see page 8), however if [NTSC 
INPUT SELECT] is in this position when recording a NTSC 
3.58 signal, no colour is available for the PAL TV. Once the 
recording is completed, you then need to select [on PAL TV] 
to view the recording in colour on PAL TV.

• On some TVs, the playback picture may roll up or down. 

If your TV has V-HOLD control or equivalent adjustment 
function, use it to adjust the picture.

Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of tapes 
recorded by NTSC signals on a PAL system TV. The NTSC 
signal is not completely converted to a PAL signal. For this 
reason, images play back by this function cannot be recorded 
correctly on other VCRs.

VCR Auto Power On
When you insert a video cassette, the VCR switches on 
automatically.

Auto Playback Start
When you insert a video cassette with a broken erasure 
prevention tab, playback starts automatically without press 
[PLAY] 

VCR-off Playback
When the VCR is off, the inserted cassette can be played 
back by pressing [PLAY] 

Auto Rewind
When the tape reaches the end, the VCR automatically 
rewinds it to the beginning.
• This function does not work during timer recording, OTR 

recording and fast-forwarding. 

Automatic Switching Off and Ejection
When the VCR is switched off, the inserted cassette can be 
ejected simply by pressing [STOP/EJECT] 

(38). The VCR will 

eject the cassette and automatically turn itself off again.

Keep [STOP] 

(12) pressed for at least 3 seconds.

LSQT0879.book  9 ページ  ２００５年２月２３日　水曜日　午後８時４９分