Panasonic nv-hv66eg User Manual
(RF OFF)
21
69
...
VCR Display
RF Output Channel
Test pattern
VCR Ch:39
Screen Display
!
Press
MENU for about 5 seconds. The preset channel will be
displayed on the VCR-display.
!
Press channel select buttons
CH or 0 to invoke [- -].
!
Confirm with
ENTER.
If a 21-pin Scart cable is used, please adjust the following
settings to disable the VCR´s RF-output channel.
settings to disable the VCR´s RF-output channel.
Channel tuning / Correcting interferences
!
Turn on your television set.
!
Turn on the VCR by pressing the
Stand-by/on switch.
!
Press
MENU for about 5 seconds. The preset channel is
displayed on the VCR-display.
!
Adjust television set to show the test picture.
If there are any interferences select another channel on the
television set and the VCR.
If there are any interferences select another channel on the
television set and the VCR.
!
Press the
CH button to change the channel
(e.g. Channel 39). Fine-tune television set until
a clear picture is displayed.
a clear picture is displayed.
!
Confirm with
ENTER.
Continue VCR Auto Setup (Automatic tuning).
D The VCR will not initiate the VCR Auto Setup if it was run once
before.
Reset the device to factory defaults (page 14). Upon doing so
you will be able to start VCR Auto Setup again.
Reset the device to factory defaults (page 14). Upon doing so
you will be able to start VCR Auto Setup again.
D Press
EXIT to abort VCR Auto Setup. You can run VCR Auto
Setup again at another time.
!
Press
MENU,
the Menu screen appears.
!
With
select Clock set.
!
Press
ENTER.
Setting Time and Date
: select
:
access
: return
: exit
ENTER
MENU
EXIT
!
Select [AUTO] and confirm with
ENTER.
ENTER.
Menu
!
Select [MANUAL] and confirm with
ENTER.
ENTER.
!
With
or
...
enter Time and Date, then store
with
ENTER.
1
2
3
0
: select
:
access
: exit
ENTER
EXIT
Timer recording
Tuning
Clock set
Others
Language : English
Tuning
Clock set
Others
Language : English
Test pattern
VCR Ch:36
AUTO
Time
: 12 : 00 : 00
Date
: 11. 6. 04
RF Output Channel
If you decide to just use the RF coaxial cable to connect the TV set you must adjust the
video output channel with the TV set’s input channel.
video output channel with the TV set’s input channel.
Automatic tuning
If the device does not find a TV
station broadcasting the time
signal, set Time and Date manually.
station broadcasting the time
signal, set Time and Date manually.
Manual tuning
Clock set
: select
:
access
: return
: exit
ENTER
MENU
EXIT
MANUAL
Time
: 12 : 00 : 00
Date
: 11. 6. 04
Clock set
CH
TRACKING/V-LOCK
9