Panasonic nv-mx2b User Manual

PUSH

W.B/SHUTTER/IRIS/
VOL/JOG

Writing Printing Data on a Card

(DPOF Setting)
DPOF Setting Printing data (DPOF Setting), such as the number of images to be
printed, can be written to the Card. “DPOF” means Digital Print Order Format.

Set the [PICTURE/MPEG4/VOICE] Selector to [PICTURE].

Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[DPOF SETTING] >> [YES] >> [VARIABLE].

≥To print all pictures one at a time, select [ALL 1]. When all images are

not printed, select [ALL 0].

Select a desired picture and press the [PUSH] Dial.

≥The number of prints set by DPOF

is displayed.

≥The selected picture is marked with a frame.

Turn the [PUSH] Dial and select the number of pictures to be
printed, and press the [PUSH] Dial.

≥The [¥] indication

is displayed in the picture set.

Repeat Step 3 and 4 and press the [MENU] Button when the
setup is completed.

To Verify DPOF Setting

Select [VERIFY] in Step 2 above. The pictures for which 1 or more print is set
in DPOF are played back continuously.

≥For other notes concerning this item, see page 51.

~~~~~~~~~~~~~~~~~~~~~~~~

Formatting a Card

If a Card becomes unreadable by the Movie Camera, formatting it may make
it reusable. Formatting erases all the data recorded on a Card.

Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD
FORMAT] >> [YES].

≥Since a confirmation message appears, select [YES] and formatting will be

carried out.

≥When the formatting is completed, the screen becomes white.
≥It may not be possible to use the Card which was formatted using this Movie

Camera on another unit. In this case, format the Card on the unit which will
be using the Card. Take steps to ensure that valuable files are stored on the
personal computer, etc. as well before proceeding.

DPOF SETTING

(PRINT QUANTITY)

PRESS MENU TO EXIT

PUSH

W.B/SHUTTER/IRIS/
VOL/JOG

TAPE

CARD

PICTURE

VOICE

MPEG4

CARD MODE

2,5

2,3,4

B.book 44 ページ２００１年８月２７日月曜日午前１０時１４分