Panasonic nv-mx2b User Manual

4-1: Although a Cassette with no audio dubbing is being 

played, is [12bit AUDIO] on the [PLAYBACK 
FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS] 
Main-Menu set to [ST2]? To play back a Cassette with 
no audio dubbing, [12bit AUDIO] must be set to [ST1]. 
(

l 32)

4-2: Is the Variable Speed Search Function working? Push 

the Operation Lever towards [

1] to cancel the Variable 

Speed Search Function. 

l 27)

1:

Is [PICTURE QUALITY] on the [CARD SETUP] 
Sub-Menu set to [NORMAL] or [ECONOMY]? If 
recording is done with it set to [NORMAL] or 
[ECONOMY], images with fine details may include a 
mosaic-like pattern. Set [PICTURE QUALITY] to [FINE]. 
(

l 36)

Card Photoshot Playback images do not look 
normal.

2:

The picture may be damaged. In order to prevent the 
loss of image data, backing up on a Cassette or a 
personal computer is recommended. 

l 34, 40, 51)

k

] Indication is displayed.

3:

The data was either recorded in a different format, or 
data is damaged.

4:

Either the Movie Camera or the Card may be damaged. 
Please consult a dealer.

ª Digital Video System

In a digital video system, images and sounds are converted 
into digital signals and recorded on a tape. This complete 
digital recording is capable of recording and playback with 
minimal image and sound deterioration.
In addition, it automatically records data, such as Time Code 
and Date/Time, as digital signals.
Compatibility with S-VHS or VHS Cassettes
Because this Movie Camera employs a digital system for 
recording image and sound data, it is not compatible with 
conventional S-VHS or VHS video equipment that employs 
an analog recording system.
The size and shape of the Cassette are also different.
Compatibility with Output Signals
Because AV signal output from the AV signal output socket 
is analog (the same as conventional video systems), this 
Movie Camera can be connected with S-VHS or VHS video 
or a TV for playback.

ª Focus

The Auto Focus System automatically moves forward and 
backward the focusing lens inside the Movie Camera to bring 
the subject into focus so that the subject can be seen clearly.
However, the Auto Focus System does not function properly 
for the following subjects or under the following recording 
conditions.
Please use the Manual Focus Mode instead.
1) Recording a subject whose one end is located closer 

to the Movie Camera and the other end farther away 
from it
≥Because Auto Focus makes adjustments at the centre 

of an image, it may be impossible to focus on a subject 
that is located in both foreground and background.

≥Because the focus is on the dirty glass, the subject 

behind the glass will  not be focused.

≥Because the light information that comes through the 

lens decreases considerably, the Movie Camera 
cannot focus correctly.

with glossy surfaces or by highly reflective objects
≥Because the Movie Camera focuses on the objects 

with glossy surfaces or on highly reflective objects, the 
recording subject may become blurry.

≥Because the focus lens inside moves mechanically, it 

cannot keep up with the fast-moving subject.

≥Because the Movie Camera achieves focus based 

upon the vertical lines of an image, a subject with little 
contrast, such as a white wall, may become blurry.

ª White Balance Adjustment

Depending on the type of light source, the colours recorded 
by the Movie Camera may be affected. In some cases, 
images may be recorded with bluish or reddish hue. To 
minimize the effect of light on the subject’s colour, what is 
called White Balance Adjustment becomes necessary.

White Balance Adjustment recognizes the colour of light and 
makes adjustment so that the white colour will become pure 
white.

This Movie Camera stores settings that are optimal for 
several kinds of general light sources. The Movie Camera 
determines the hue of light that it receives through the Lens 
and White Balance Sensor

l 7), thereby judging the 

recording condition, and selects the closest hue setting. This 
function is called Automatic White Balance Adjustment.
However, since white balance settings for only several kinds 
of light sources are stored, the Auto White Balance Function 
does not operate properly when recording occurs under light 
that is out of the range of the setup values.

ª Time Code

Time Code signals are data that indicate time measured in 
hours, minutes, seconds, and frames (25 frames per 
second). If this data is included in a recording, an address is 
assigned to each image on the tape.
≥The Time Code is automatically recorded as a part of the 

sub-code at each recording.

≥When a new (previously unrecorded) Cassette is inserted, 

the Time Code automatically starts from zero. If a recorded 
Cassette is inserted, the Time Code picks up from the point 
where the last scene was recorded. (In this case, when the 
Cassette is inserted, the zero display [0h00m00s00f] may 
appear, but the Time Code starts from the previous value.)

≥The Time Code cannot be reset to zero.
≥Unless the Time Code is continuously recorded from the 

beginning of a tape, accurate editing may not be possible. 
To ensure that the Time Code will be recorded with no 
breaks, we recommend the use of the Camera Search 
Function 

l 18) or the Blank Search Function (l 28) 

before recording a new scene.

ª Memory Stop Function

The Memory Stop Function is useful for the following 
operations.
Rewinding or fast-forwarding a tape to a desired 
position

B.book  56 ページ  ２００１年８月２７日 月曜日 午前１０時１４分