Panasonic NV-SJ400A User Manual

Setting Up

∂/µ:

∂/µ:

Identification numbers must be set for G-Code programming.
Proceed with the G-Code programming operation described
on page 24, and the identification numbers of the TV stations
concerned will be set automatically. This will allow G-Code
programming to be undertaken without performing the
operation described on this page. However, you can follow
the setting procedure described below if you wish to set the
identification numbers of all the TV stations prior to actual
programming.

“Identification numbers” refer to the numbers used for
identifying TV stations.
The programme position on the VCR receiving the TV station
are set in these identification numbers.
Have a newspaper or magazine which lists today’s local TV
station programmes and G-Code numbers on hand.

Preparations
≥

Set the clock of the VCR. See page 12.

≥

Store TV broadcasts in your VCR. See pages 9–11.

≥

Confirm that the TV is on and the VCR viewing channel is
selected.

≥

Turn on the VCR.

Press the MENU button V to

display the Main menu on the
TV screen.

Press the Cursor buttons (34) T

to select “G-CODE CH SET” then
press the ENTER button U.

Press the Cursor buttons (34) T

to select the identification number
(GUIDE CH) (001–255).

Press the Cursor buttons (2 1) T

then press the Cursor buttons
(34) T to select the programme
position (1–99, A1 or A2).
≥

 To set the other TV stations, press

the Cursor buttons (2 1) T then
repeat steps 3– 4.

Press the MENU button V twice to exit the On Screen

Display.

Note:
≥

 To receive satellite stations, the satellite receiver must be

connected on the VCR and programme position must be
set depending on the type of connection.
A1/A2:

When the satellite receiver is connected to the

Audio/Video input sockets (AV1/AV2).

When the satellite receiver is connected by mean of the RF
coaxial cable, set to a free programme position between 1
and 99.

°

When the Sky decoder is connected to the Audio/Video input
sockets:

Set to “A1” or “A2”.

When the Sky decoder is connected by means of the RF
coaxial cable:

Set to the programme position that the Sky decoder is
tuned to.

≥

When G-Code programming, turn on the Sky decoder and
select the desired Sky channel.

°

°

°

°

°