Panasonic nv-fj613elk User Manual
Connecting and Setting up
VCR
TV
Aerial
(not supplied)
21-pin Scart cable
(not supplied)
RF Coaxial Cable
(supplied)
Note:
The RF (radio frequency) coaxial cable must be connected for TV reception,
even if the video recorder is already connected with a 21-pin Scart cable.
The RF (radio frequency) coaxial cable must be connected for TV reception,
even if the video recorder is already connected with a 21-pin Scart cable.
Set up the connections shown here, and connect the mains lead (supplied)
to your AC mains.
to your AC mains.
If you want to connect the TV only
with a RF Coaxial Cable
with a RF Coaxial Cable
(supplied),
you must ensure that the video output
channel is adjusted to the input channel of
the TV.
channel is adjusted to the input channel of
the TV.
For this purpose, please also read the
operating instructions for your TV.
operating instructions for your TV.
Switch on the VCR
Press the MENU Button for about 7
seconds until the number of the channel
appears on the VCR display
(the pre-setting is channel 36).
seconds until the number of the channel
appears on the VCR display
(the pre-setting is channel 36).
Tune the TV until the test screen appears.
On Screen Display
VCR
Ch:36
VCR display
VQT9002
3
Automatic Setting
Switch on the VCR
and the [Country] setting menu will appear.
Use the cursors
and the [Country] setting menu will appear.
Use the cursors
on the
remote control to select your country.
(Operation of cursors see Menu Operation
on page 5.)
(Operation of cursors see Menu Operation
on page 5.)
After pressing , all the TV stations
which can be received will be tuned
automatically in about 5 minutes.
which can be received will be tuned
automatically in about 5 minutes.
When the menu [Clock setting] appears,
use the cursors
use the cursors
on
the remote control to select
the Time and Date manually.
the Time and Date manually.
To end this procedure, press .
Press this button to exit the Settings.
Notes:
More information about the remote control, see page 4-5.
If the selection for the Country menu does not appear
after switching on the VCR, you can restart the Automatic Setting;
see VCR Settings on page 8.
An incorrect setting of Time or Date (observe summer- and wintertime)
will influence the Timer recording.
If you select the country [Suisse] the menu [Power save] will appear.
Select the settings with the cursors
after switching on the VCR, you can restart the Automatic Setting;
see VCR Settings on page 8.
An incorrect setting of Time or Date (observe summer- and wintertime)
will influence the Timer recording.
If you select the country [Suisse] the menu [Power save] will appear.
Select the settings with the cursors
and store with .
More information see on page 9.
On Screen Display
Panasonic VCR
Country
Belgien
Deutschland
Belgique
Österreich
Belgi
ê
Portugal
A distorted picture on the channel can be
reduced, by adjusting the VCR and the TV
to another channel.
reduced, by adjusting the VCR and the TV
to another channel.
Use this button to select
the channel number (e.g. channel 39).
the channel number (e.g. channel 39).
Tune the TV until the test screen appears.
To store this adjustment, press .
After that, please continue with the Automatic Setting
with the [Country] setting menu.
with the [Country] setting menu.
Panasonic VCR
Clock setting
Clock setting : MAN.
Time
Time
: 20:30:24
Date
: 21.03.01
RF Coaxial Cable
(supplied)
TV
VCR
AV
RF in
RF out
VCR
Ch:39