Panasonic nv-fj613ecns User Manual

Page of 16
VQT9002
2
Warning and Important Information
To prevent fire, electric shocks and damage :
The VCR, the remote control, the mains lead and the cassettes
must not be used if it is damaged.   Protect them from:
Insertion of fingers or objects
Direct sunlight, heat, cold, rain, wetness, soiling and dust
Shock and mechanical stress (do not bend the mains lead)
Electric and magnetic fields
Lightning strikes during thunderstorms (disconnect mains and aerial plugs)
For your own safety and to protect the VCR:
Do not remove outer cover, to prevent electric shock. There are no
serviceable parts inside. Refer all servicing to qualified service personnel.
Only transport and set up the VCR in a horizontal position.
Only connect cables when all the parts of the VCR are switched off.
Only clean the outside of the VCR, using a soft cloth and no cleaning fluid.
The mains lead must not be used for other equipment.
In case of rapid temperature changes, do not operate your VCR
for minimum 1 hour.
Please observe copyright laws 
when recording sound tracks and film.
Conserve the environment:
 
 See Power save on page 9.
Disposal of old equipment:
Batteries
, packaging and old equipment should not be
disposed of as domestic waste, but in accordance with
the applicable regulations
.
Instructions on inserting Remote Control Batteries:
The lifetime of the battery is about 1 year, depending on the frequency of use.
Do not use one old and one new battery, or different types of batteries together
(e.g. one alkali and one zinc-carbon battery).
Only insert batteries which contain no toxic materials
(such as lead, cadmium, mercury).
Do not use rechargeable batteries (nickel-cadmium batteries).
If the remote control will not be used for a long time, remove the batteries and
store them in a cool and dry place.
Do not heat or short-circuit the batteries.
Remove spent batteries immediately and
replace them with type AA, UM3 or R6.
Observe the   and   polarities
when replacing the batteries.
Safety Information
This equipment complies with European
conformity requirements, in accordance with
the conditions of electromagnetic compatibility
and product safety.
This equipment complies with the
requirements of protection class 2.
This equipment complies with the safety
requirements of the VDE
(German Association of Electrical Engineers).
As this equipment gets hot during use, operate it in well ventilated place; do
not install this equipment in confined space such as a bookcase or similar unit.