Panasonic PT-D9510U User Manual

53

• If the black portions of the picture are fractured or tinged with green, adjust the clamp position its optimum

state.

Press the MENU button. ... The MENU screen will be displayed.
Press the UP (

) and DOWN (

) arrow buttons to select POSITION.

Press the ENTER button. ... The POSITION screen will be displayed.
Press the UP (

) and DOWN (

) arrow buttons to select CLAMP POSITION.

• The clamp position can be adjusted when an RGB signal has been input with the

analog RGB module (ET-MD95RGB)

Press the ENTER button. ... The CLAMP POSITION screen will be displayed.
Press the LEFT (

)and RIGHT (

) arrow buttons to adjust.

• The adjustment values will change from 0 (min.) to 254 (max.)

Optimum value for clamp position adjustment
• If the black sections are fractured 

→ The optimum value is when the fracturing of the black sections

is at a minimum.

• If the black sections are tinged with green

→ Optimum value is when the green portion turns black but is not

smudged.

The projector has a picture mute capability that allows you to put the image off instantaneously. To mute the
image, press the PIC-MUTE button on the projector or remote control. To reset picture mute, press the PIC-MUTE
button a second time.

MENU

AUTO

SETUP

LENS
PICTURE
POSITION
OPTION
SIGNAL  LIST
TEST

PATTERN

MENU :

SUB MENU : ENTER

EXIT : MENU

POSITION

SHIFT
SIZE
BLK
CLOCK    PHASE
INPUT     RESOLUTION
CLAMP   POSITION
KEYSTONE
EDGE BLENDING

MENU :

SUB MENU : ENTER

EXIT : MENU

CLAMP

POSITION

POSITION : MIN

ADJUST :

EXIT : MENU