Panasonic PT-50LC14 User Manual

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo

Always be sure to follow the procedure given below to turn the projection display power ON and OFF.

•  The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned off. At the same time, the 

POWER indicator will blink Red.

Press  POWER on projection display or Remote Control 
to turn power on.
The Power Indicator blinks Green for about 10 seconds 
and then turns solid Green.

The Power Indicator

•  If the POWER button is accidentally turned off during use, after power is turned back on, it may take a short period before the 

lamp automatically comes on.

•  After the unit is turned on, maximum picture brightness will be achieved in 5-10 minutes. This is normal.

Press POWER on projection display or Remote Control 
to turn power off.

•  When the AC Cord is unplugged, the internal cooling fan stops op er at ing. In this case, the lamp will be insuffi ciently cooled and 

will take a while to turn ON again.

The Power Indicator blinks Red for about 1 minute and 
then turns solid Red.

 POWER  button/
POWER indicator

Red

Power – OFF (Standby mode)

Red blink

Power – OFF (Now cooling)

Green

Power – ON

Green blink

Power – ON (Preparing to light lamp)

Power shuts off after a Black Screen is displayed for a 
few seconds.

•  If POWER is pressed during the Black Screen display, Power 

is turned back on.