Panasonic PT-50LC14 User Manual

•  This projection display is equipped with various screen modes. If a screen mode with a different aspect from the broad cast 

program is selected, image will appear differently. Select the proper screen mode with this in mind.

•  Be careful when using this projection display for commercial purposes or for public use, such as in cafes and hotels.
•  Shrinking and enlarging images by using screen mode switching function (zoom, etc.) may violate copyright laws.
•  Images displayed on a wide screen TV will be cut off or distorted at the edges, when viewing normal aspect images of 4:3 in 

ZOOM, JUST or FULL mode. Display in NORMAL mode to view the original image intended by the producer.

•  For 1080i and 720p input images, screen size cannot be adjusted.
•  The adjusted setting will be kept even when the projection display is turned off.
•  The signals output from the monitor output terminal on the back of the projection display is not affected when the screen size 

and position is adjusted.

Press ► button. The image moves to the right.

PC input

Press ◄ button. The image moves to the left.

Press ► button. The image moves up.

PC input

Press ◄ button. The image moves down.

Press OK 
button.

If noise appears on the ends of the 
image in SHRINK, switch to 
ENLARGE.

Only JUST mode

If noise appears on the ends of the 
image in WIDEN, switch to NARROW.

Only NORMAL 
mode
(Except PC 
input)

Press ► button. Press to enlarge image vertically.

Only ZOOM 
mode

Press ◄ button. Press to shrink image vertically.

Press ► button. Press to enlarge image horizontally.

PC input

Press ◄ button. Press to shrink image horizontally.

Press ► button.
Press ◄ button.

Adjust in order to remove any picture interference or contour blurring 
which may occur in computer images.

PC input

(EN LARGE)

(SHRINK)

(NARROW)

(WIDEN)