Panasonic pt vx400ntu User Manual

Using Remote control

- ENGLISH

Preparation

Using Remote control

Installing and Removing batteries

Open the cover

1 )

Install batteries and close the cover

2 )

(Insert the – side first.)

Remove the batteries in the reverse order of

installation.

Setting Remote control ID numbers

When you use the system with multiple projectors, you can operate all the projectors simultaneously or each

projector individually using single remote control, if unique ID number is assigned to each projector.

After setting the ID number of the projector, set the same ID number to the remote control.

There are 7 different ID codes (ALL, Code 1~Code 6), the initial ID number is [ALL].

Setting the ID number

1) While holding down the <MENU> button, press the Number Buttons, the number

you press the Number buttons corresponds to the desired ID code number.

2) The number you press the number buttons are as follows: Code 1= <1 MUTE>,

Code 2= <2 D.ZOOM +>, Code 3= <3 VIDEO>,

Code 4= <4 FREEZE>, Code 5= <5 D.ZOOM ->, Code 6= <6 S-VIDEO>.

3) The ID code is reset to [ALL] (default) by pressing the <MENU> button and

<0 LAMP> button at the same time for 5 seconds or more.

Attention

The status of the ID code is not stored after replacing batteries.

Note

For details, please refer to the [Remote control] of the [Setting] menu.

(

page 61)

MENU button

Number buttons