Panasonic pt vx400ntu User Manual

J

Press ▲▼ to enter a number. Press ► to fix the 

number and move the red frame pointer to the next 

box. The number changes to . If you fixed an 

incorrect number, use the ◄ button to move the 

pointer to the number you want to correct, and then 

enter the correct number.

Repeat this step to complete entering a four-digit 

number.

After entering the four-digit number, move the pointer 

to “Set”. Press the <SELECT> button so that you can 

start to operate the projector.

J

Press the Number buttons on the remote control to 

enter a number (

Æ

page 19). When you complete 

entering a four-digit number, the pointer moves to 

“Set”. Press the <SELECT> button so that you can 

start to operate the projector.

If you fix an incorrect number, use the ◄ button to 

move the pointer to the number you want to correct, 

and then enter the correct number.

If you entered an incorrect PIN code, PIN code and 

the number () will turn red for a moment. Enter 

the correct PIN code all over again.

If the PIN code number is not entered or wrong PIN code 

 

z

number is entered within three minutes after the PIN 

code dialog box appeared, the projector will be turned off 

automatically.

The “1234” is set as the initial PIN code at the factory.

 

z

After the “OK” icon disappears, 

you can operate the projector.  

While the projector is locked with the PIN code.

Put the label below (supplied) on in a prominent place 

of the projector's body while it is locked with a PIN 

code.