Panasonic pt vx400ntu User Manual

When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect 

 

z

the power plug from the wall outlet. (

Æ

pages 29, 33)

Be sure to observe the procedure “Turing off the projector” (

 

z

Æ

page 33) when performing power supply 

operation.

J

Wipe off dirt and dust using a soft dry cloth.

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector 

 

z

with a dry cloth.

Do not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners, or chemical treated 

 

z

dusters. Using them may cause deterioration of the outer case.

J

Wipe off the dirt and dust off the front surface of the lens with soft clean cloth.

Do not use a cloth that has an abrasive surface or a cloth that is moist, oily, or covered with dust.

 

z

Do not use excessive force when wiping the lens as it is fragile.

 

z

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface. 

 

z

Please handle with care.

J

 Filter prevents dust from accumulating on the optical  

elements inside the projector. Should the filter become  

clogged with dust particles, it will reduce cooling fans’  

effectiveness and may result in internal heat buildup  

and adversely affect the life of the projector. 

If a “Filter warning” icon appears on the screen,  

replace the filters immediately. 

J

 Turn over the projector and pull out the filter  

 

z

cover (bottom); pull up the handle and take out 

the whole filter (bottom). 

Press up the latches and pull out the filter  

cover (side); pull out the handle and take  

out the side filter.

Filter cover (bottom)





Filter cover (side)

Latches (press up)

Handle (pull out)

Handle (pull up)