Panasonic PT-LB30NTU User Manual
32
■ Computer operations (Wireless settings
(See page 35)
)
Open the Windows TCP/IP Setting window, and set the TCP/IP.
(See page 33 or 34)
Refer to the Windows manual for a detailed description.
For the subnet mask, register the same value as the default projector network
[USER] setting.
For the IP address, enter the same value up to the “255” part of the default
subnet mask setting for projector network [USER], and then enter a different
value for the remainder.
Refer to the Windows manual for a detailed description.
For the subnet mask, register the same value as the default projector network
[USER] setting.
For the IP address, enter the same value up to the “255” part of the default
subnet mask setting for projector network [USER], and then enter a different
value for the remainder.
2
Start up the wireless card utility.
When using Windows XP, open [Control Panel]
When using Windows XP, open [Control Panel]
→
[Network Connections].
Make the same SSID,
communication mode and WEP
settings as the default projector
network [USER] settings.
communication mode and WEP
settings as the default projector
network [USER] settings.
Default projector network [USER] settings
SSID
: Panasonic Projector
Communication mode : 802.11 AdHoc
WEP
WEP
: Off
1
Start up Wireless Manager ME 2.0, select [USER] from the
network number list, and set the network.
network number list, and set the network.
(See page 29)
Wait until the projector’s name appears on the connection list, select the name
displayed, and proceed with the connections.
displayed, and proceed with the connections.
3
User connections (not using simple connections)
1
LB20NT
OFF
ON
NETWORK
NAME CHANGE
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
SELECT
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
SELECT
N E T W O R K
RETRN
ENTER
N E T W O R K
USER
ADJ
RETRN
ENTER
Select [NETWORK] on the network
menu, and press the [ENTER]
button.
menu, and press the [ENTER]
button.
1
Select [USER] with the [
]
buttons, and press the [ENTER]
button.
button.
2
Other Applications
(Changing the Initial Settings)
(cont.)
■ Projector operations (Network number settings)
If the projector and computer could not be connected by following the steps on page
12, connect them by performing the steps below.
12, connect them by performing the steps below.
Setting item
Default projector network
Example of
[USER] setting
computer setting
Subnet mask
255. 255. 255.
0
255. 255. 255.
0
IP address
192. 168.
10. 100
192. 168.
10. 101
Setting Example