Panasonic PT-AX100U User Manual

You can operate the projector with the Remote control
within the remote range 7 m.

Q Facing to the projector

Ensure the Remote control emitter is facing to 
the Remote control signal receptor on front of 
the projector and press the required buttons to 
operate.

Q Facing to the screen

Ensure the Remote control emitter is facing to 
the screen and press the required buttons to 
operate the projector. The signal will be reflected 
off the screen. The operating range may differ due 
to the screen material.

You can switch the input method 
manually by pressing the INPUT 
SELECT button. Press the button 
several times or press 

I H to cycle 

through the input methods as follows. 
The actual projected image will be 
changed in a while.

Graphical guidance will be displayed on the upper right 
of the display and you can confirm the selected input 
method which is hilighted in yellow. See "INPUT 
GUIDE" on page 34.

When projecting an image, press FREEZE
to capture the projected image and display 
it on the screen as a still picture. Press 
again to escape.

NOTE:
  The Remote control may malfunction under 

strong light such as a fluorescent. Do not let 
strong light shine onto the signal receptor.

  If there are any obstacles in between the remote 

control unit and the receptor, the Remote control
may not operate correctly.

Connected to COMPONENT 
IN terminal equipment’s 
signal

Connected to S-VIDEO IN
terminal equipment’s signal

Connected to VIDEO IN
terminal equipment’s signal

Connected to HDMI terminal 
equipment’s signal

Connected to PC IN terminal 
equipment’s signal

NOTE:
  If you select an unplugged input method, the 

guidance will blink on and off several times.

  See "List of compatible signals" on page 41.
  See "Connecting terminals" on page 13.

NOTE:
  Escaping from the freeze mode is available by 

pressing any button except the LIGHT button.

I

H

FG

I

H

I

H

FG