Panasonic PT-AX100U User Manual

You can move the projected image horizontally for fine 
adjustment.

You can move the projected image vertically for fine 
adjustment.

If you have interference patterns on the projected 
image, which is sometimes referred to as moire or 
noise, you can minimize it by pressing 

I H to adjust the 

clock frequency.

If you require further adjustment for the same reason as 
the DOT CLOCK adjustment, you can fine adjust the 
timing of the clock. Press 

I H to adjust.

  See “Navigating through 

the MENU” on page 26.

NOTE:
  If the projecting signal’s dot clock frequency is 

higher than 150 MHz, the adjustment may not 
make a difference.

NOTE:
  If the projecting signal’s dot clock frequency is 

higher than 150 MHz, the adjustment may not 
make a difference.

  CLOCK PHASE is not available with 

1 125 (1 080)/50i, 1 125 (1 080)/60i, 
1 125 (1 080)/50p, 1 125 (1 080)/60p, 
1 125 (1 080)/24p, 750 (720)/50p and 
750 (720)/60p signals using the COMPONENT
connection.