Panasonic PV-27DF4 User Manual

The following are possible audio broadcast 

types and on-screen displays. The signal 

being received is indicated with a “   ” mark 

while the selected audio mode is indicated 

with an arrow. To change the audio mode for 

these broadcasts, see the “Audio Mode for 

TV Viewing” section.

Multi-channel Television Sound Stereo 

broadcast. Select STEREO audio mode.

• If stereo broadcast is weak and the display 

flickers, select MONO audio mode for possible 

improvement.

Secondary Audio Program (sub language).

Select SAP audio mode for the sub 

language.

Press AUDIO to select the desired audio 

mode as described above. (Arrow shows 

selection.)

Normal monaural sound broadcast.

< Example >

Equipped with 

-TV Noise Reduction 

for true MTS reproduction. 

-TV Noise 

Reduction is required for good stereo 

separation and audio fidelity. 

 is a 

registered trademark, and is licensed by 

 Technology Licensing.

Multi-channel Television Sound Stereo (main 

language) and Secondary Audio Program 

(sub language) broadcasts are being 

received simultaneously. Select the STEREO 

or SAP audio mode.

• Each press of 

AUDIO will change 

the audio mode as 

shown below.

• “SAP” is selected 

with first press of 

AUDIO.

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

DISPLAY

AUDIO

12:00AM

CH 08

STEREO
SAP
MONO