Panasonic PV-C2033WA User Manual
8
2 / 6 / 2002 WED 12 : 00PM
DST : ON
AUTO CLOCK SET
COMPLETED
SETT I NG : CH 1 0
If AUTO CLOCK SET IS
INCOMPLETE screen
appears, set the clock using
MANUAL CLOCK SET
procedure on next page.
INCOMPLETE screen
appears, set the clock using
MANUAL CLOCK SET
procedure on next page.
Connections/ Initial Setup
(Ready to Play)
How to Connect
Initial Setup (Ready to Play)
1
Plug the unit power cord into an
AC wall outlet.
AC wall outlet.
Press
POWER on the remote or
unit. The unit comes on and auto
channel and clock set starts.
channel and clock set starts.
• If you use a cable box, turn it on and set it to the
Public Broadcasting Service (PBS) channel in
your time zone. If you use a DSS reciever, it
must be turned off.
your time zone. If you use a DSS reciever, it
must be turned off.
Settings are made
automatically. When setup is
done, this screen appears.
automatically. When setup is
done, this screen appears.
For ANT./Cable
Connect the cable from Antenn
Connect the cable from Antenn
Cable to the VHF/UHF terminal
on the unit.
on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
VHF/UHF
VHF/UHF
UNIT
IN from
ANT./CABLE
ANT./CABLE
VHF/UHF
WARNING:
Overtightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
may damage jacks. Finger tighten only.
Please make all cable or antenna connections before powering on.
VHF/UHF
VHF/UHF
Cable TV
Converter Box
Converter Box
CH AUTO SET PROCEEDING
PROCEEDING
AUTO CLOCK SET
CANCEL : PRESS STOP KEY
3
Connecting
IN from
ANT./CABLE
ANT./CABLE
2
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
PRESS I NG ACT I ON KEY
AUTO CLOCK SET
I S I NCOMPLETE