Panasonic pv-gs200 User Manual
Recording Mode
-38-
To Resume Automatic Adjustment
Set the [AUTO/MANUAL/FOCUS] Switch to
[AUTO].
Set the [AUTO/MANUAL/FOCUS] Switch to
[AUTO].
≥For other notes concerning this item, see
-74-
.
Manual Focus Adjustment
Focus can be adjusted manually for recording in
a situation where auto focus may not function
well.
a situation where auto focus may not function
well.
1
Set the [AUTO/MANUAL/FOCUS] Switch
(35)
to [MANUAL].
≥The [MNL] Indication appears.
2
Slide the [AUTO/MANUAL/FOCUS] Switch
(35)
to [FOCUS].
≥The [MF] Indication (Manual Focus Mode)
appears. (PV-GS200)
≥The [1MF] Indication (Manual Focus Mode)
appears. (PV-GS120)
3
(PV-GS200)
Turn the Focus Ring
Turn the Focus Ring
to adjust the
focus.
(PV-GS120)
Press the [
Press the [
5] Button
(16)
or [
6] Button
≥If you keep pressing the [5] Button or [6]
Button, the speed of adjusting will be faster.
AUTO MANUAL
FOCUS
(35)
AUTO MANUAL
FOCUS
(35)
MF
MNL
MF
MNL
PV-GS200
PV-GS120
ENTER
FADE
STILL
i
s
(16)
To Resume Automatic Adjustment
Set the [AUTO/MANUAL/FOCUS] Switch to
[AUTO] or [FOCUS].
Set the [AUTO/MANUAL/FOCUS] Switch to
[AUTO] or [FOCUS].
Using the Built-in Flash
(PV-GS200 only)
The Built-in Flash enables you to record still
pictures in a dark place. The Flash lights twice to
detect the surrounding luminosity and to light
properly.
The Built-in Flash enables you to record still
pictures in a dark place. The Flash lights twice to
detect the surrounding luminosity and to light
properly.
1
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA]
>> [FLASH] >> [ON] or [AUTO].
[CARD RECORDING MENU] >> [CAMERA]
>> [FLASH] >> [ON] or [AUTO].
≥If [AUTO] is selected, the Flash can be
lighted if light is needed by sensing the
surrounding luminosity.
surrounding luminosity.
2
Slide the [
ßL] Lever
≥The Flash pops up.
3
≥Flash is lighted and the image becomes still.
4
Press the [PHOTO SHOT] Button
(47)
or
Recording Start/Stop Button
(42)
.
≥Flash is not lighted when recording.
Adjusting Brightness of the Flash
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA] >>
[FLASH LEVEL] >> a desired Flash Level.
≥Normally, set it to [NORMAL]. (The [
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA] >>
[FLASH LEVEL] >> a desired Flash Level.
≥Normally, set it to [NORMAL]. (The [
ß]
Indication appears.)
≥If the brightness is not enough in [NORMAL]
setting, set it to [
i] (the [
ßi] Indication
appears), if it is too much, set it to [
j] (the [
ßj]
Indication appears).
≥For other notes concerning this item, see
-74-
.
STILL
ENTER
FADE
MENU
i
s
(14)
ENTER
FADE
STILL
i
s
PHOTO
SHOT
SHOT
(47)
(42)
PV-GS120_200Eng.book 38 ページ 2004年2月16日 月曜日 午後1時32分