Panasonic pv-27d52 User Manual

• Make settings according to amplifier

connected to optical audio output as
shown in above table.

• When a dts decoder is not connected, to

enjoy dts DVD, please select audio output
other than dts on the dts DVD menu
screen. Otherwise, there will be no sound
from the unit speakers.

*1 Audio output from unit is converted to 48

kHz/16 bit in addition to audio from digital
audio output.
To enjoy high quality sound at 48 kHz/
20 bit /24 bit or 96 kHz, connect the
amplifier or decoder directly to the audio
output connectors, not to the digital
audio output connector. [Select  “OFF” at
the  “LPCM (DVD)”.]

*2 When connecting an amplifier (with an

optical digital input connector) which
does not contain the Dolby Digital or dts
decoder, be sure to select “OFF”.
If  “Bitstream” is selected, starting DVD
play may cause such a high level of
noise as to be harmful to your ears and
damage the speakers.

*3 When a dts decoder is connected,

please select “Bitstream” in “dts”.
If “OFF” is selected, there will be no
sound.

Select the digital output to be output from the
optical digital audio output connector of the unit.

■

■

■

■

■ “LPCM (DVD)” selections

OFF: Linear PCM of less than 48 kHz/16 bit is output.

When playing DVDs recorded in linear PCM of
over 48 kHz/20 bit or 96 kHz, no digital audio is
output. (Factory preset)

PCM: When playing DVDs recorded in linear PCM of

48 kHz/20 bit/24 bit or 96 kHz, digital audio
converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright protection.)

■

■

■

■

■ “Dolby Digital” selections

Dolby Digital bitstream (1ch-5.1ch) is
output. (Factory preset)

No output.

■

■

■

■

■ “dts” selections

dts bitstream is output. (Factory preset)

No output.

■

■

■

■

■ “DRC (Dynamic Range Compression)” selections

OFF: Normal audio range is selected. (Factory preset)
ON:

For dynamic sound even at low volume, this is
useful for late-night listening. [Dolby Digital DVDs
only].

■

■

■

■

■ “SURROUND” selections

Surround Sound creates the effect of sound coming from
non-existent rear speakers even when only connected to
a 2-channel stereo system.
OFF: No Surround Sound effect. (Factory preset)
ON:

Surround Sound effect.

1) Press 

 to select

an item.

2) Press SET

repeatedly for output.
(See below.)

1) Press 

 to select

“AUDIO OUTPUT.”

2) Press SET to

display screen.

AUD I O  OUTPUT

SELECT

:  

SET

: SET

END

: ACT I ON

LPCM(DVD)

: OFF

D o l b y     D i g i t a l

:  B i t s t r e a m

d t s

: OFF

DRC

: OFF

SURROUND

: OFF

DVD  MAIN  MENU

SELECT

:  

SET

: SET

END

: ACT I ON

D I SC  LANGUAGES

AUDIO  OUTPUT

ST I L L   MODE

: F I ELD

TV  MODE

: L e t t e r b o x

1

3

2

4

• Turn off other surround effects when

using this surround effect.

• For optimum effect, the distance between

the unit and the listener should be about
3 or 4 times the distance between the
right and left front speakers.

LPCM
(DVD)

OFF

PCM*

1

PCM*

1

PCM*

1

Dolby

Digital

OFF

OFF*

2

Bitstream

Bitstream

dts

OFF

OFF*

2

OFF

Bitstream

No amplifier is connected

AV amplifier (with digital
audio input connector)
without Dolby Digital/dts
decoder

AV amplifier including
Dolby Digital decoder

AV amplifier including
Dolby Digital/dts decoder

*

3

Press ACTION to redisplay DVD menu
and go to step 2 to setup another item.
Or, press ACTION three times to exit.

*Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on

the remote and try the button again.

20_25_27D52 (P46-49 Setting DVD).p65

2002/04/16, 13:30

47