Panasonic rf-d3 User Manual

Whip antenna

RQTT0867

Connections

The speaker does not

have magnetic

shielding. Do not place

this unit near televisions,

personal computers or

other devices easily

influenced by

magnetism.

Note

Headphones

(Not included)

Reduce the volume before connecting.
Plug type: 3.5 mm stereo

PHONES

Avoid listening for prolonged periods of time to prevent
hearing damage.

Note

Extend the whip antenna and adjust its direction.

Control guide

To improve

reception

If noise is excessive in FM
You can improve FM reception by switching
reception from “ AUTO STEREO” to “MONO”.

Standby/on switch [ ]
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming
a small amount of power. The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

Standby/on
switch [

]

Connecting to external recording

equipment

(Cables and equipment not included.)

Carefully read the operating instructions of the other
equipment before using.

LINE OUT

REC IN

(R)

(L)

Tape deck, etc.

Plug type:
3.5 mm stereo

Tuning control
FM frequency select,
DAB station tune,
Menu select, Time
adjust control.

Volume control

Menu confirmation

button [ENTER/

-TIMER CHECK]

FM or DAB

select button

[TUNER/BAND]

Menu button [MENU]

Display button [DISPLAY]

DAB primary/secondary select button

[PRIMARY/SECONDARY]

Speaker

Sound EQ/Sound

virtualizer button

[SOUND EQ/

–S.VIRTUALIZER]

Numbered

buttons [+5,1-5]

Display

Select “MONO”

Press

Select “FM
MODE ADJUST”

Press

AC adaptor

Connect the AC adaptor firmly to the
unit and the outlet.

The included AC adaptor is for use with
this unit only. Do not use it with other
equipment.

Note

DC IN

To household
mains socket