Panasonic rf-d7 User Manual
Supplied accessories
Operating Instructions
DAB-FM Radio
Model No.
RF-D7
RF-D5
RF-D5
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read the
instructions completely.
Please keep this manual for future reference.
Before connecting, operating or adjusting this product, please read the
instructions completely.
Please keep this manual for future reference.
“EB” on the packaging indicates the United Kingdom.
RF-D7 is used in the illustrations unless otherwise mentioned.
RF-D7 is used in the illustrations unless otherwise mentioned.
Note
• The included AC mains lead is for use with this unit only. Do
not use it with other equipment.
• Do not use an AC mains lead from any other type of
equipment with this unit.
Note
RQT8947-B
M0107KS0
EB
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about any of the check points, or if the solutions indicated in the chart do not solve the
problem, consult your dealer for instructions.
problem, consult your dealer for instructions.
Display
The reception is poor.
There is too much
noise and distortion.
There is too much
noise and distortion.
• Try changing the length and angle of the rod
antenna.
• Inside some buildings and on some means of
transport, the signals may be weak, making it
hard to hear the stations. In such cases, use
the unit as close to the windows as possible.
hard to hear the stations. In such cases, use
the unit as close to the windows as possible.
• If this unit is used close to another radio, TV,
VCR or other electrical appliance, noise may
be heard from the resulting mutual interference.
Try turning off the power of the radio, TV or
VCR, etc. in the vicinity.
be heard from the resulting mutual interference.
Try turning off the power of the radio, TV or
VCR, etc. in the vicinity.
• This unit may not operate properly after it has
been moved from a cold location to a warm
place. This happens because condensation
has formed on the unit’s operating parts: The
unit will return to normal in about 60 minutes.
place. This happens because condensation
has formed on the unit’s operating parts: The
unit will return to normal in about 60 minutes.
• Noise may be caused if a mobile telephone is
brought close to the unit. Use the unit at a
distance from mobile telephones.
distance from mobile telephones.
Use the numbers indicated in parentheses when asking for
replacement parts. “As of January 2007”
replacement parts. “As of January 2007”
The illustrations show RF-D7.
1 AC mains lead (K2CT3CA00004)
No sound is heard.
Is the volume control at the lowest position?
Adjust the volume level using [VOLUME]
Adjust the volume level using [VOLUME]
Dry cell batteries were
installed in the unit,
but the unit won’t
work.
installed in the unit,
but the unit won’t
work.
Is the AC mains lead connected to the unit? To
power the unit using the batteries, unplug the
AC mains lead from the unit.
power the unit using the batteries, unplug the
AC mains lead from the unit.
When the unit’s power
is turned on, the
“CHANGE BATTERY”
message is displayed.
is turned on, the
“CHANGE BATTERY”
message is displayed.
Replace the existing batteries with new ones or
use a household mains socket.
use a household mains socket.
The unit’s power is
not turned off even
when the set time is
reached.
not turned off even
when the set time is
reached.
Is “SLEEP” displayed on the display panel?
(
(
page 7)
If it is, press [SLEEP] and check the remaining
time.
time.
The timer does not
work.
work.
Is the timer setting OFF?
(
(
page 8, Setting the timer settings to ON).
– –:– –
You plugged the AC mains lead in or used
batteries if the AC mains lead was not
connected for the first time or there was a power
failure recently. Set the time.(
batteries if the AC mains lead was not
connected for the first time or there was a power
failure recently. Set the time.(
page 7)
NO SERVICE
The DAB station is currently not broadcasting.
NO SIGNAL
This DAB station cannot be received. Check
your antenna (
your antenna (
page 4).
DATA
Data broadcast being received over the DAB
broadcast signal cannot be used on this unit.
broadcast signal cannot be used on this unit.
SCRAMBLED
The DAB broadcast station being received
cannot be accessed (E.g. pay per use etc.).
cannot be accessed (E.g. pay per use etc.).
Scan Failed.
DAB stations are not receivable. Check your
antenna and try Auto scanning (
antenna and try Auto scanning (
page 5).
F
(
(
indicates a
number.)
Connect the AC mains lead firmly to the unit and
the outlet. If the unit still cannot be turned on,
disconnect the AC mains lead, remove the
batteries, and consult your dealer.
the outlet. If the unit still cannot be turned on,
disconnect the AC mains lead, remove the
batteries, and consult your dealer.
STATION FULL
DAB station memory is full. Use the following
method to clear station memory.
1. Press [MENU].
2. Select “STATION CLEAR” with [TUNING].
3. Press [ENTER]. “OK? Push ENTER” is
method to clear station memory.
1. Press [MENU].
2. Select “STATION CLEAR” with [TUNING].
3. Press [ENTER]. “OK? Push ENTER” is
displayed.
4. Press [ENTER].
Station memory is erased and the unit
automatically begins Auto scanning.
Station memory is erased and the unit
automatically begins Auto scanning.
Matsushita Electric Industrial Co., Ltd.
Web site: http://panasonic.net
Web site: http://panasonic.net
En
RF-D7_5-0205 07.2.5 2:49 PM ページ 1