Panasonic sa-ht16 User Manual
Op
eratio
ns
16
RQT7
94
9
Control guide
Main unit
Display
[DIGITAL INPUT]
Program format indicators
Show the channels contained in the digital
input signal.
They do not light when input is analog.
L: Front left channel
C: Center channel
R: Front right channel
LS: Surround left channel
S: If the surround channel is monaural.
RS: Surround right channel
LFE (Low Frequency Effects): Deep-bass
effect.
Show the channels contained in the digital
input signal.
They do not light when input is analog.
L: Front left channel
C: Center channel
R: Front right channel
LS: Surround left channel
S: If the surround channel is monaural.
RS: Surround right channel
LFE (Low Frequency Effects): Deep-bass
effect.
[TUNED, ST, MONO]
Radio indicators
TUNED: A station is tuned.
ST: A stereo FM broadcast
is tuned.
MONO: You have switched
to monaural mode to
improve reception.
TUNED: A station is tuned.
ST: A stereo FM broadcast
is tuned.
MONO: You have switched
to monaural mode to
improve reception.
[SLEEP]
Sleep timer indicator.
[M]
Flashes or lights
during presetting.
during presetting.
[C.FOCUS, 2CH MIX, SFC]
C.FOCUS: Appears when you are using
Center Focus
2CH MIX: Appears when you are listening to a
multi-channel source with headphones
SFC: Appears when you are using an SFC
mode
Center Focus
2CH MIX: Appears when you are listening to a
multi-channel source with headphones
SFC: Appears when you are using an SFC
mode
General display
Shows the input mode, radio
frequency and other general
information.
frequency and other general
information.
[kHz, MHz]
Frequency unit
indicators
kHz: AM, or PCM
sampling frequency
MHz: FM
indicators
kHz: AM, or PCM
sampling frequency
MHz: FM
Spectrum
analyzer display
analyzer display
TUNED
MONO
SLEEP
ST
kHz
MHz
DIGITAL INPUT
SFC
M
C.FOCUS
L
C
R
LS
RS
S
LFE
100Hz
10kHz
2CH MIX
Standby indicator [^]
When the unit is connected to the AC
mains supply, this indicator lights up in
standby mode and goes out when the
unit is turned on.
mains supply, this indicator lights up in
standby mode and goes out when the
unit is turned on.
[8, POWER]
Press to switch the unit from on to
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power.
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power.
[% DIGITAL, % PL II
,
dts]
Lights to indicate the source’s input signal
and decoding format used.
%
and decoding format used.
%
DIGITAL: Dolby Digital sources
%
PL II: Dolby Pro LogicII decoder is
being used
dts: DTS sources
dts: DTS sources
[H.BASS]
For enhancing the bass sound.
The indicator lights when the feature
is on.
The indicator lights when the feature
is on.
[INPUT SELECTOR]
For selecting input.
The display changes as
follows:
The display changes as
follows:
[2 TUNE 1]
For tuning the radio and
presetting channels.
presetting channels.
[MENU]
• For entering various
settings.
• Press and hold to exit the
MENU mode.
[PHONES]
Headphone jack
Plug type: 3.5 mm (1/8") stereo
• Sound does not come from the
Plug type: 3.5 mm (1/8") stereo
• Sound does not come from the
speakers if you connect
headphones.
headphones.
• Avoid listening for prolonged
periods of time to prevent hearing
damage.
damage.
POWER
INPUT SELECTOR 2
2
TUNE
MENU
%
DIGITAL %PL
H. BASS
DOWN
VOLUME
PHONES
UP
Remote control
signal sensor
signal sensor
[VOLUME]
Volume control.
TUNER
TV
DVD
DVR/VCR
GAME/AUX
SC-HT17PP-EN.fm Page 16 Thursday, March 17, 2005 9:56 AM