Panasonic sa-ht833v User Manual

RQT7921

≥Ensure that the unit is connected directly to the television, and is not connected through an A/

V selector or other equipment.

≥The unit and television are using different video systems. Use a multi-system or NTSC 

television.

≥The system used on the disc doesn’t match your television. PAL discs cannot be played. This 

unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not function 
properly.

≥Mobile telephone chargers can cause some disturbance.

≥If you are using a TV indoor antenna, change to an outdoor antenna. 

≥The television antenna wire is too close to the unit. Separate the antenna wire of the 

television from the unit. 

≥Change “TV Aspect” in “Video” tab. 

≥Change the Zoom setting.

≥Restore the zoom ratio to a1.00.

≥Set “Subtitle Position” in Display Menu to “0”.

≥Turn off TV’s zoom function.

≥Use the other preset aspect ratios or manual adjustment.

≥Zoom function may not work well, especially in dark scenes and may not work depending on 

the type of disc.

≥Adjust the tracking.

≥Make sure the television’s input setting is correct.

≥The video heads are dirty: clean them with a head-cleaning cassette.

≥The video heads are worn: consult your dealer.

≥The tape is old or damaged.

≥You cannot correctly play tapes recorded with other systems (e.g., PAL).

≥Some distortion is normal with tapes recorded using VP mode.

≥You are playing a blank or poor quality part of the tape. 

≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue back 

to appear. Consult your dealer.

≥Adjust the vertical hold.

≥This problem is caused by the editing method or material used on DVD-Video, but should be 

corrected if you use interlace output. Change “Video Output Mode” in Picture Menu to “480i”.

≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be 

interlace.

≥Press [SHIFT]i[PROGRESSIVE]. Or select “480p” in “Video Output Mode” in Picture Menu.

≥When progressive output is on, closed captions will not be displayed.

≥Noise may occur when playing WMA files.

≥Some audio effects do not work or have less effect with some discs.

≥Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed.

≥When connected with headphones, only Sound Field Control is effective.

≥An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances 

and cords away from the subwoofer.

≥Adjust the tracking.

≥The tape is old or damaged.

≥Adjust the position of the FM or AM antenna. 

≥Use an outdoor antenna.

≥Turn the television off or separate it from the unit.

≥Separate the antenna from other cables.

≥If the erasure prevention tab has been removed, cover the hole with adhesive tape. 

≥Check the clock and calendar.

≥Set the channel and start and end times correctly.
≥Be sure to press [

] after programming to put the unit in timer recording standby.

≥Program times may be overlapped.

≥Press [W CH] or [X CH] to select “AV”.

≥Check the connections to the other equipment. 

≥Move the other equipment away from the television as it may be picking up interference. 

≥This unit complies with industry standards regarding the recording and duplication of copy-

protected material. This includes commercial videotapes and DVDs. Consequently, copying 
not only infringes copyright laws but also presents serious technical difficulties. Even in cases 
where a copy can be made, the quality will be very poor.

RQT7921-P_ENG.book  46 ページ  ２００５年５月２５日　水曜日　午後３時２４分