Panasonic sa-ht400 User Manual
4
RQT6361
Speaker connections
Step
1
2 3 4
Attach the stickers to the speaker cords
Placement of speakers
Front speakers (
1
left
2
right)
Place on the left and right of the TV at seated ear height.
Center speaker (
3
)
Place underneath or above the center of the TV.
Surround speakers (
4
left
5
right)
Place slightly behind the seating area, about one meter (3 feet)
higher than ear level.
higher than ear level.
Subwoofer (
6
)
The subwoofer can be placed in any position as long as it is at a
reasonable distance from the TV.
reasonable distance from the TV.
The front, center, and surround speakers should be placed at
approximately the same distance from the seating area. The
angles in the diagram are approximate.
approximately the same distance from the seating area. The
angles in the diagram are approximate.
About 10 cm (4")
The 6 speaker cords are all the same.
Connecting speakers and speaker cords
Rear panel of small speakers (The 5 small speakers are the same.)
Rear panel of large speaker
Connect the cable with sticker
6
attached to the large speaker:
subwoofer.
Set-up the speakers so the numbers on the attached stickers correspond to the positions shown in the diagram.
Attach the rubber feet to the speaker
Small speaker
Standing
Lying down
Large
speaker
speaker
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and set-up
combinations.
If this occur, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and set-up
combinations.
If this occur, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
Moving the brand plate
You can turn the brand plate if you want to set up the small
speakers laying on their sides.
Ensure the plate doesn’t get caught on the net when you turn it.
The speaker nets cannot be removed.
speakers laying on their sides.
Ensure the plate doesn’t get caught on the net when you turn it.
The speaker nets cannot be removed.
1
FRONT L
1
1
FRONT L
FRONT L
1
1
FRONT L
FRONT L
2
2
FRONT R
FRONT R
3
3
CENTER
CENTER
4
4
SURROUND L
SURRO
UND L
5
5
SURROUND R
SURROUND R
6
6
SUBWOOFER
SUBWO
OFER
1
1
FRONT L
FRONT L
2
2
FRONT R
FRONT R
3
3
CENTER
CENTER
4
4
SURROUND L
SURRO
UND L
5
5
SURROUND R
SURROUND R
6
6
SUBWOOFER
SUBWO
OFER
1
FRONT L
Connect the cables with stickers
1
to
5
attached to the small
speakers: 2 x front, 2 x surround, and 1 x center.
1
2
3
4
5
6
One sheet of 25 rubber feet is included. Use 3 or 4 feet per
speaker.
speaker.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field.
How you set up your speakers can affect the bass and the sound
field.
¡
Place speakers on flat secure bases.
¡
Placing speakers too close to floors, walls, and corners can result
in excessive bass. Cover walls and windows with thick curtain.
in excessive bass. Cover walls and windows with thick curtain.
¡
Keep your speakers at least 10 mm (13/32") away from the
system for proper ventilation.
system for proper ventilation.
Note
1
2
3
4
Attach these rubber feet to prevent vibration causing the speakers
to move or fall over. The five small speakers can be set-up either
standing or lying down.
See page 5 if you would prefer to hang the speakers on a wall or
use speaker stands.
to move or fall over. The five small speakers can be set-up either
standing or lying down.
See page 5 if you would prefer to hang the speakers on a wall or
use speaker stands.
Connect the red cord to the red terminal (+) and the black cord to
the black terminal (–).
the black terminal (–).