Panasonic sc-ak48 User Manual
26
RQT5321
Sound quality/sound field operations
Timer operations
Selecting the TRI-AMP mode
A
The tri-amp control controls sound quality by allowing you to adjust
the level of the amplifiers for the low, mid and high regions.
It is a type of manual equalizer and cannot be used with the other
types of equalizers.
the level of the amplifiers for the low, mid and high regions.
It is a type of manual equalizer and cannot be used with the other
types of equalizers.
Press [LOW], [MID] or [HIGH] to display “TRI-AMP”.
The [TRI-AMP] indicator lights.
(Within 5 seconds)
Dial [SOUND CONTROL JOG] to set the level as
desired.
desired.
Repeat the above steps to set other frequency bands accordingly.
The original display is restored on the display panel in about 5 seconds.
The original display is restored on the display panel in about 5 seconds.
To release the mode
Dial [SOUND CONTROL JOG] to turn [TRI-AMP] indicator off.
Dial [SOUND CONTROL JOG] to turn [TRI-AMP] indicator off.
Notes
•
TRI-AMP mode setting is stored automatically. It is recalled when
“TRI-AMP” is next selected.
“TRI-AMP” is next selected.
•
All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
sound quality setting has been selected.
Using the timer
Using the sleep timer
This timer turns your system OFF at the set time (Max. 2 hours,
settable at 30-minute interval). It lets you fall asleep listening to music.
settable at 30-minute interval). It lets you fall asleep listening to music.
by remote control only
Preparation
Switch on the power.
The figure shows how to set the system to standby mode after 30
minutes.
minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 90
SLEEP 120
SLEEP 60
SLEEP 30
SLEEP OFF
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “SLEEP OFF”.
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time:
(only while system is ON)
Press [SLEEP].
(only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
Notes
•
The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD using CD Manager function.
to edit-record a CD using CD Manager function.
•
The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
1
2
1
2
TRI-AMP
A
TRI-AMP CONTROL
LOW
MID
HIGH
TRI-AMP
SOUND CONTROL JOG
B
B
Indicator